1. Choose model
MX 125 (2004 bis 2007, TZ0)
No results were found for the filter!
Complete revision kit for Rotax 122 & 123 125cc engine. The set consists of all necessary gearbox & crankshaft bearings, as well as the appropriate sealing rings. If larger repairs and a splitting of the engine are planned, it is always...
Available
€53.90
*
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...
Available
€2.49
*
Kupferdichtring, Kupfer, 14x18x1,5, f. Thermoschalter / Universal
Universell einsetzbarer Kupferdichtring mit den Maßen 14x18x1,5. Wird idr. bei Piaggio/Derbi/Aprilia Motoren als Dichtung für den Thermoschalter verwendet. Kann aber für jegliche andere Möglichkeit Anwendung finden.
Available
€2.79
*
The seals should be replaced for every engine or clutch opening. With old gaskets, there is a risk that they will no longer seal properly after they have been closed a second time. The clutch housing gasket from Athena offers exactly...
Available
€7.99
*
This article is an original spare part from Aprilia OEM number for comparison purposes : AP0250975
Available
€9.99
*
This pack contains 2 reinforced competition Viton spy joints for the crankshaft, specially designed for anti-friction and high speed. They are smaller and lighter than the original joints for the ROTAX 125cc engine, resulting in improved...
Almost gone
€12.99
*
Crankshaft bearing set, Rotax 122/123, Aprilia RS 125, RX/SX 125
Replacement crankshaft bearings for the Rotax 122 & 123 engine. Scope of delivery Incl. both main bearings, a new piston pin bearing and the two crankshaft seal rings. Bearing type: 6206 C3
Almost gone
€41.95
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Available
€1.99
*
Viewed