Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Aprilia MX 125 Suction & injection system

1. Choose model
MX 125 (2004 bis 2007, TZ0)
Close filters
No results were found for the filter!
Benzinhahn Original Replica
Benzinhahn Original Replica, Vacuum, universal
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...

Available

€8.99 *
Manual choke cable
Manual choke cable, universal, anodized handle
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.

Available

€12.99 *
Clamp
Clamp, universal, for example f. petrol, water or oil hoses, 6mm
6mm clamp for fuel hoses. Delivered is 1 piece.

Available

€1.99 *
Fuel Hose
Fuel Hose, 1 meter, d=5mm, different colours
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...

Available

€2.99 *
Ansaugstutzen Aprilia OEM
Ansaugstutzen Aprilia OEM, Rotax 122
Ersatzansaugstutzen für Rotax 122 Motoren. OEM Artikelnummer zu Vergleichszwecken Aprilia: AP0267918

Almost gone

€149.90 *
Float chamber drain plug Float chamber drain plug, PWK Carburetor, Orange
Simple styling part for flat slide and type PWK carburetor. The screw is made of anodized aluminum. Delivery Incl. gasket

Available

€6.00 *
Oil hose Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m

Available

€3.49 *
Oil hose Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m

Available

€3.99 *
Chokehebel Chokehebel, Universal, verschiedene Farben, zur Montage am Lenker
Universalchokehebel für Custom umbauten. Einfache Befestigung mittels Schelle, direkt am Lenker passt wie erwähnt auf quasi jeden Seilzug Choke. Verfügbar in Schwarz & Chrom.

Available

€10.99 *
Carburettor DellOrto PHBH 28 BS Carburettor DellOrto PHBH 28 BS, universal
The PHBH 28mm version can be used as a replacement carburettor on various 125cc vehicles (e.g. RS 125). On 125s with a smaller carburettor, it can even have a slight performance-enhancing effect if tuned correctly. Note Does NOT have an...

Available

€139.90 *
Benzinhahn Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....

Available

€10.99 *
Exhaust slider Italkit Racing Exhaust slider Italkit Racing, Rotax 122/123 (Aprilia RS/RX/SX 125, 2-stroke), adjustable
The exhaust slide valve of throttled Rotax 122 & 123 engines is opened abruptly at 8,000 rpm by the electrical control of the slide valve. Not everyone can cope with this sudden power delivery and not everyone wants to be driving at such...

Available

€139.90 * ; €119.90 *
Exhaust slider Italkit Racing
Exhaust slider Italkit Racing, Rotax 122/123
Pneumatic exhaust system for the Aprilia RS 125 engine. Most people will have noticed on their 125cc Aprilia RS that when the engine is de-throttled the power is suddenly released at around 8000 rpm by opening the exhaust slide. As this...

Available

€155.90 *
Oil hose Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm

Available

€2.99 *
Petrol tap Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...

Almost gone

€8.49 *
Spring clip for fuel line Spring clip for fuel line
Spring clip for a tight fit of the fuel hose on the fuel tap and carburetor connection. 8,8 - 9,5mm

Available

€2.99 *
Inlet manifold / reed block kit Italkit
Inlet manifold / reed block kit Italkit, V-Force, Rotax 122/123, 32mm - 34mm carburetor
The V-Force reed valve block from Italkit has a maximum cross-section on the smallest valves. This allows the diaphragms to open and close with less inherent gas force, resulting in higher efficiency and improved motor performance....

Available

€109.90 *
Viewed