1. Choose model
MX 125 (2004 bis 2007, TZ0)
2. Filter by category
No results were found for the filter!
Replacement crankshaft from the house R&D, made in Europe and exact copy of the Rotax 122/123 original - crankshaft. Since the Rotax engine usually already belongs to the older semesters, we generally recommend before installing the...
Available
€199.99
*
Complete revision kit for Rotax 122 & 123 125cc engine. The set consists of all necessary gearbox & crankshaft bearings, as well as the appropriate sealing rings. If larger repairs and a splitting of the engine are planned, it is always...
Available
€53.90
*
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...
Available
€8.99
*
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.
Available
€12.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...
Available
€2.49
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.99
*
Kupferdichtring, Kupfer, 14x18x1,5, f. Thermoschalter / Universal
Universell einsetzbarer Kupferdichtring mit den Maßen 14x18x1,5. Wird idr. bei Piaggio/Derbi/Aprilia Motoren als Dichtung für den Thermoschalter verwendet. Kann aber für jegliche andere Möglichkeit Anwendung finden.
Available
€2.79
*
The seals should be replaced for every engine or clutch opening. With old gaskets, there is a risk that they will no longer seal properly after they have been closed a second time. The clutch housing gasket from Athena offers exactly...
Available
€7.99
*
This article is an original spare part from Aprilia OEM number for comparison purposes : AP0250975
Available
€9.99
*
This article is an original product of the Piaggio brand OEM number for comparison purposes : 876418
Out of Stock
€3.99
*
Ersatzansaugstutzen für Rotax 122 Motoren. OEM Artikelnummer zu Vergleichszwecken Aprilia: AP0267918
Almost gone
€149.90
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Almost gone
€9.99
*
Improve your motorcycle experience with the Uma Racing quick shift lever. This innovative accessory allows you to shift gears without the need for the clutch, while protecting your motorcycle transmission. Installation is as easy as can...
Almost gone
€259.90
*
Float chamber drain plug, PWK Carburetor, Orange
Simple styling part for flat slide and type PWK carburetor. The screw is made of anodized aluminum. Delivery Incl. gasket
Available
€6.00
*
Das RCB Kupplungsgehäuse ist im Gegensatz zum herkömmlichen Deckel mit einem Sichtfenster ausgestattet, wodurch man einerseits die Qualität des Öles prüfen kann und man andererseits auch ein cooles optisches Plus erhält und die...
Almost gone
€149.90
*
This pack contains 2 reinforced competition Viton spy joints for the crankshaft, specially designed for anti-friction and high speed. They are smaller and lighter than the original joints for the ROTAX 125cc engine, resulting in improved...
Almost gone
€12.99
*
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. The clip is used in various places for various bikes. An example on Yamaha motorcycles is the water pump. OEM part number for comparison purposes 990091040000,...
Available
€1.99
*
Needle roller bearing / Gearbox bearing / Shift drum bearing / Shaft bearing, universal, 10x10x14
This article is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
ProTaper clutch fitting made of cold forged aluminum. The clutch fitting comes with quick adjustment as well as a bearing forged aluminum lever. The nylon ring on the clamping surface can prevent the armature from breaking in the event...
Out of Stock
€56.95
*
Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...
Available
€9.99
*
Viewed