Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Aprilia RS/RS4 125 Rear silencer, spare parts & accessories

1. Choose model
RS 125 (ab 2021, XA- Euro5)
RS 125 (2017 bis 2020, KC - Euro4)
RS4 125 (2011 bis 2017, TW - Euro3)
RS 125 (2006 bis 2013, RM/RD)
RS 125 (1995 bis 2005, MP/SF)
Close filters
3 From 3
No results were found for the filter!
Arrow elbow
Arrow elbow, Aprilia RS 125 from year 17 (type: KC), for X-Cone rear silencer, with EG-BE
Single manifold from Arrow inc. catalyst. Required to mount X-Cone rear silencer on the RS 125 (Type: KC).

Almost gone

€368.00 *
Intermediate pipe Arrow
Intermediate pipe Arrow, Aprilia RS 125 from year 17 (type: KC), for Thunder rear silencer, with EG-BE
Single intermediate pipe from Arrow including catalyst. Is needed to mount "Thunder" rear silencer on the Aprilia RS 125.

Available

€243.00 *
Exhaust- Rear silencer Arrow X-Cone
Exhaust- Rear silencer Arrow X-Cone, Aprilia RS 125 from year 17 (type: KC), with EG-BE
Single Nichom X-Cone rear silencer from Arrow. The X-Cone models are always supplied by Arrow with carbon end cap. This article is delivered WITHOUT matching manifold and serves as a spare part, if the exhaust muffler should be damaged...

Almost gone

€390.00 *
Exhaust- Rear silencer Arrow Thunder Alu
Exhaust- Rear silencer Arrow Thunder Alu, Aprilia RS 125 from year 17 (type: KC), with EG-BE
The Arrow Thunder for Aprilia RS 124 in Euro4 standard replaces the original underfloor rear silencer like the previous Euro3 silencer. Basically, Arrow also places the rear silencer under the engine, but adds an additional stainless...

Available

€331.00 *
Manifold gasket Athena
Manifold gasket Athena, Piaggio 125cc 4T engine, (Aprilia RS4 / RS 125 from year 11, Derbi Senda/GPR 124 4T, etc...)
Copper seal ring. Inner diameter : 26,2 mm Outside diameter : 35 mm Thickness : 1,5 mm

Available

€3.99 *
Mounting rubber for exhaust systems Mounting rubber for exhaust systems, universal
Technical data Length pin/bolt: 53mm Diameter bolt: 8mm length rubber element: 19mm

Available

€6.49 *
Stud bolt Stud bolt, M6x27
Outlet stud with M6 thread on both sides. As a replacement for torn out or over-turned studs. The bolt is galvanized and has a total length of 27mm. A single bolt is supplied.

Available

€0.59 *
Exhaust stud & nuts set Exhaust stud & nuts set, M6 x M6 - 2 pieces
Again and again annoying with torn or heavily rusted exhaust bolts? With this set this problem can now be solved. The set consists of 2 bolts with the dimension M6xM6 as well as the collar nuts.

Available

€2.99 *
Exhaust stud & nuts set Exhaust stud & nuts set, M8 x M8 - 10 pieces
Again and again annoyance with torn or heavily rusted exhaust bolts? with this set from Motoflow this problem can now be solved. The set consists of 10 bolts with the dimension M8xM8 as well as the collar nuts.

Available

€12.99 *
Catalyst insert Arrow
Catalyst insert Arrow, universal, with EG-BE
If you want to use your Arrow exhaust 100% legally, there is no way around this Arrow sports catalytic converter. The catalytic converter offers the best exhaust values with reduced backpressure of the exhaust gas. So there are no...

Available

€161.00 *
3 From 3
Viewed