1. Choose model
RX/SX 125 (ab 2021, KT - Euro5)
RX 125 (2018 bis 2020, KXA - Euro4)
2. Filter by category
No results were found for the filter!
Not for beginners! These are racing brake pads. As the name suggests, the pads are ideal for very sporty downhill riding or on the race track. The pads are made of sintered metal. This offers the best braking effect, especially at high...
Available
€19.99
*
The Motoflow brake fluid reservoir offers you the individuality of your bike. The top is transparent, which makes it easier to check the level, but the underside and the lid are made of CNC-milled aluminium , which makes it shine...
Available
€29.95
*
Herewith you get a color matching your bike brake fluid reservoir with CNC cap. The attachment takes place directly on the tank. The cap comes incl. seal, clamps and hose. In addition, the tank (∅42mm) has the typical level indicators...
Available
€9.99
*
This item is a cheap alternative to the expensive original spare part. The container can be used with a little effort on all common bikes. Due to the small volume, we recommend using it only for the rear brake.
Available
€7.99
*
Matching the various other engine styling parts from Radical Racing, herewith also comes a fully enclosing rear brake cylinder guard. incl. mounting material
Available
€17.99
*
;
From €14.99
*
In this universal brake fitting are only 2 things to note. Firstly, it fits on handlebars with a 22mm diameter. Secondly, no mirror thread is pre-drilled.
Available
€20.95
*
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible. In many cases there is no way around replacement. With this we offer an inexpensive universal part. Colour:...
Available
€39.95
*
Cheap alternative to expensive original brake pads, but still high quality! This set of brake pads is suitable for everyday use, especially the longevity and solid brake performance characterize them. Technical data Dimensions: 85x42,5mm...
Available
€19.99
*
;
€13.95
*
CNC machined brake cylinder cover, fits on the rear master cylinder of the Aprilia RX & SX models from 2018 up, available in different colours. Delivery without seal! Aprilia OEM Part No.: Part of 2R000490
Available
€14.95
*
;
From €5.99
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible, in many cases there is no way around replacement. Technical data Distance between the mounting holes: 50 mm...
Available
€27.95
*
Universal hand brake cylinder for the front disc brake. The complete fitting is delivered including brake lever and is equipped with a brake light switch. The brake cylinder is ideal for handlebar conversions and/or as an alternative...
Available
€22.95
*
NEW
This item is an original spare part (OEM) from Aprilia OEM OEM part number for comparison purposes : 1D003350 Scope of delivery: 1
Out of Stock
€29.95
*
NEW
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : 2R000361 Scope of delivery: 1
Out of Stock
€24.95
*
NEW
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : 667152 Scope of delivery: 1
Out of Stock
€1.29
*
NEW
NG BrakeDisc is one of the few manufacturers to provide all brake discs with KBA approval, which is why they can be driven on public roads without further ado. The general type approval from the German Federal Motor Transport Authority...
Almost gone
€79.95
*
Ø Ext: 220.00 mm Ø Int: 105.00 mm Campana : 0.00 mm Espesor: 5.00 mm Anclajes nº: 4 Ø entre anclajes: 125.00 mm
Available
€20.95
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : 2B006160 Scope of delivery: 1
Almost gone
€48.95
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : 2B004297 Scope of delivery: 1
Almost gone
€46.95
*
This article is an original spare part (OEM) from Aprilia OEM number for comparison purposes : 00H01311531 Scope of delivery: 1
Almost gone
€134.90
*
Lieferumfang 1 Stück. Aprilia Originalersatzteil. Maß: M8x20 Schlüssel: Torx® OEM Artikelnummer zu Vergleichszwecken Aprilia: 2B004309
Available
€2.69
*
In the case of ABS system faults, the ABS impulse ring is often a spare part that causes faults in addition to the wheel speed sensor. The ring is quickly bent, and correct speed pickup is then no longer possible. This item is an...
Out of Stock
€29.95
*
Spring washer Aprilia OEM original spare part OEM part numbers for comparison 2B005020
Out of Stock
€3.89
*
Viewed