1. Choose model
RX/SX 125 (ab 2021, KT - Euro5)
SX 125 (2018 bis 2020, KXB - Euro4)
SX 125 (2008 bis 2014)
2. Filter by category
No results were found for the filter!
NEW
Complete overhaul kit for the Rotax 122 & 123 125cc engine. The set consists of all necessary gearbox and crankshaft bearings, as well as the appropriate sealing rings. If major repairs and splitting of the engine are planned, it is...
Available
€59.95
*
Replacement crankshaft from the house R&D, made in Europe and exact copy of the Rotax 122/123 original - crankshaft. Since the Rotax engine usually already belongs to the older semesters, we generally recommend before installing the...
Available
€199.99
*
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...
Available
€8.99
*
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.
Available
€12.99
*
Complete overhaul kit for the Rotax 122 & 123 125cc engine. The set consists of all necessary gearbox and crankshaft bearings, as well as the appropriate sealing rings. If major repairs and splitting of the engine are planned, it is...
Available
€49.95
*
An oil change also includes changing the filter. To prevent the filter chamber from leaking, the O-ring that seals it should always be replaced.
Available
€3.59
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...
Available
€2.49
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.99
*
NEW
Want to get more power out of your Aprilia? Then this upgrade is just the thing! Malossi 166cc cylinder kit - High-quality aluminum cylinder with Nikasil coating for optimum durability and thermal stability. More displacement means more...
Almost gone
€858.90
*
NEW
The "T-Link" cooling pipe adapter is available for 16, 18 or 22 mm cooling pipes. The thermostat cooling tube adapter is the ideal connector for reading the cooling water temperature with VOCA or KOSO temperature gauges. The adapter can...
Available
€24.95
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : 2B007065 Scope of delivery: 1
Almost gone
€13.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : AP0250890 Scope of delivery: 1
Out of Stock
€9.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : 1A006754 Scope of delivery: 1
Almost gone
€169.90
*
This set contains: 1A017976 Water pump cover gasket 871358 Water pump rotor 1A005891 Water pump shaft oil seal 1A008740 Water pump shaft 82897R Oil seal / cooling water circuit If you need other parts for your cooling system, you can...
Out of Stock
€139.90
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : 847048 Scope of delivery: 1
Out of Stock
€2.99
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : 847075 Scope of delivery: 1
Out of Stock
€5.89
*
Kupferdichtring, Kupfer, 14x18x1,5, f. Thermoschalter / Universal
Universell einsetzbarer Kupferdichtring mit den Maßen 14x18x1,5. Wird idr. bei Piaggio/Derbi/Aprilia Motoren als Dichtung für den Thermoschalter verwendet. Kann aber für jegliche andere Möglichkeit Anwendung finden.
Available
€2.79
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : AP2DCA000254 Scope of delivery: 1
Out of Stock
€89.90
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : 871451 Scope of delivery: 1
Almost gone
€157.90
*
This article is an original spare part (OEM) from Aprilia OEM part number for comparison purposes : 2R000526 Scope of delivery: 1
Almost gone
€29.95
*
This article is an original spare part from Aprilia OEM number for comparison purposes : AP0250975
Available
€9.99
*
Viewed