Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Aprilia SX 125 Radlager & Achsen

1. Choose model
RX/SX 125 (ab 2021, KT - Euro5)
SX 125 (2018 bis 2020, KXB - Euro4)
SX 125 (2008 bis 2014)
Close filters
No results were found for the filter!
Wheel bearing
Wheel bearing, different vehicles, type: 62012RS
Wheel bearing which can be used for different vehicles as front or rear wheel bearing. Note Please compare the technical data of this bearing with your original wheel bearing. Technical data Outside diameter: 32 mm width: 10 mm Inner...

Available

€5.99 *
Ball bearing 6202 2RS
Ball bearing 6202 2RS, universal
Universal SKF bearing of type "6202-2RS", sealed on both sides. Suitable for example as rear or front axle bearing. But please compare your bearing type before ordering! Technical data Type : 6202 Inner diameter : 15 mm Outside diameter...

Available

€6.29 *
NEW
Ball bearing Nachi Ball bearing Nachi, 6202/NSE9
Quality bearings from Nachi Increased service life of wheel bearings! Outer diameter: 35 mm Width: 11 mm Inner diameter: 15 mm Waterproof

Almost gone

€7.99 *
Spacer Aprilia OEM
Spacer Aprilia OEM, Aprilia RX/SX 125 from 18 years old
This article is an original spare part from Aprilia OEM part number for comparison purposes : 2R000457 Scope of delivery: 1

Available

€3.69 *
Ball bearing / wheel bearing Ball bearing / wheel bearing, Type: 6005 2RS
Single ball bearing / wheel bearing for various vehicles. Please compare the bearing sizes with the standard bearings of your bike before ordering. Technical data Inner diameter: 25mm Outer diameter: 47mm Width: 12mm Sealed on both sides

Available

€2.99 *
Ball bearing / wheel bearing Aprilia OEM
Ball bearing / wheel bearing Aprilia OEM, Aprilia RX/SX 125, 17x40x12mm
Einzelnes Radlager für die Hinterradfelge von bspw. Aprilia RX/SX 125. Für den fachgerechten Austausch müssen unbedingt beide Lager der Hinterachse erneuert werden! Daher bitte 2 Stück bestellen! OEM Artikelnummer zu Vergleichszwecken...

Available

€12.95 *
Wheel bearing spacer Aprilia OEM
Wheel bearing spacer Aprilia OEM, Aprilia RX/SX 125
This sleeve is required when replacing wheel bearings in order to relieve the pressure on the inner ring of the bearing when it is screwed on. This Component must be replaced every time the wheel bearing is changed! OEM part number for...

Available

€5.99 *
Spacer sleeve rear wheel Aprilia OEM
Spacer sleeve rear wheel Aprilia OEM, Aprilia RX/SX125, brake disk side
Spacer sleeve, is fitted between the rim and the swing arm (on the brake disk side). OEM part number for comparison purposes Piaggio: 2B004205

Available

€5.99 *
Sealing ring wheel hub Aprilia OEM
Sealing ring wheel hub Aprilia OEM, Aprilia RX/SX 125 ab Bj. 2018, Size: 25x35x5
Replacement seal ring for the wheel hub of Aprilia RX/SX 125. Aprilia original spare part. Scope of delivery: 1 piece OEM part number for comparison purposes Aprilia / Piaggio: 2R000462

Available

€6.99 *
Axis Piaggio OEM
Axis Piaggio OEM, Aprilia RX/SX 125 ab Bj. 18, vorne
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 2R000362 Scope of delivery: 1 piece for front

Almost gone

€54.95 *
Spacer sleeve Piaggio OEM
Spacer sleeve Piaggio OEM, Aprilia RX/SX 125 from year 18, front wheel left side
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 2R000450 Scope of supply: 1 pc. front wheel left

Available

€3.50 *
Axis Piaggio OEM
Axis Piaggio OEM, Aprilia RX/SX 125 from 18, rear side
This item is an original spare part (OEM) of the brand Piaggio. OEM part number for comparison purposes 866000 Scope of delivery: 1 pc. for rear

Out of Stock

€55.95 *
Stock Stock, Universal, Type: 6004-2RS
Ball bearing sealed on both sides. Is idr. used as wheel bearing. Suitable for many different vehicles. Please check the dimensions or designation of the bearing to ensure that this type of bearing fits. Technical data Outer diameter: 42...

Available

€2.99 *
Viewed