1. Choose model
Senda DRD 125 (2010 bis 2016, DR/PK)
2. Filter by category
No results were found for the filter!
An oil change also includes changing the filter. To prevent the filter chamber from leaking, the O-ring that seals it should always be replaced.
Available
€3.59
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...
Available
€2.49
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.99
*
Kupferdichtring, Kupfer, 14x18x1,5, f. Thermoschalter / Universal
Universell einsetzbarer Kupferdichtring mit den Maßen 14x18x1,5. Wird idr. bei Piaggio/Derbi/Aprilia Motoren als Dichtung für den Thermoschalter verwendet. Kann aber für jegliche andere Möglichkeit Anwendung finden.
Almost gone
€2.79
*
Standard Dichtring. Aprilia Origianlersatzteil. OEM Artikelnummer zu Vergleichszwecken Aprilia / Piaggio: 288474 Lieferumfang: 1 Stück.
Available
€1.00
*
TRW offers a 5-piece clutch lining set for your machine. This set consists of aftermarket clutch facings, which were built after the originals and therefore offer high quality and a long service life. Clutch facings are a common wear...
Out of Stock
€29.95
*
Einzelne Zylinderfußdichtung für Aprilia 125cc 4-Takt Motoren OEM Artikelnummer zu Vergleichszwecken Piaggio: PIA-CM278202
Out of Stock
€5.99
*
This item is an original product (OEM) of the Piaggio brand OEM part number for comparison purposes : 82897R
Available
€11.99
*
This article is an original product (OEM) from Piaggio OEM part number for comparison purposes : PIA-871358
Almost gone
€17.99
*
Replacement seal for the oil drain plug. Scope of delivery 1 piece. OEM part number for comparison purposes Piaggio: 285536
Available
€1.79
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Available
€9.99
*
Improve your motorcycle experience with the Uma Racing quick shift lever. This innovative accessory allows you to shift gears without the need for the clutch, while protecting your motorcycle transmission. Installation is as easy as can...
Almost gone
€259.90
*
Originalersatzteil von Aprilia. OEM Artikelnummer zu Vergleichszwecken 1A005891
Available
€19.99
*
Almost gone
€299.99
*
Bei diesem Artikel handelt es sich um ein Originalersatzteil der Marke Aprilia/Piaggio. Trennscheibe Typ: B. Dieser Typ Trennscheibe wird insgesamt 3x im M545M Motor verbaut. Lediglich die oberste Schebe vor der Druckplatte Unterscheidet...
Almost gone
€19.95
*
Haltesystem für den Injektor von Aprilia 125cc 4-T Motoren. OEM Artikelnummer zu Vergleichszwecken Piaggio / Aprilia: 1A011529
Almost gone
€29.94
*
This item is an original spare part of the Piaggio brand. OEM number for comparison purposes: 871757
Almost gone
€19.99
*
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. The clip is used in various places for various bikes. An example on Yamaha motorcycles is the water pump. OEM part number for comparison purposes 990091040000,...
Available
€1.99
*
Needle roller bearing / Gearbox bearing / Shift drum bearing / Shaft bearing, universal, 10x10x14
This article is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
ProTaper clutch fitting made of cold forged aluminum. The clutch fitting comes with quick adjustment as well as a bearing forged aluminum lever. The nylon ring on the clamping surface can prevent the armature from breaking in the event...
Out of Stock
€56.95
*
Viewed