Handlebar end mirror Motoflow Victory universal, with approval

Universal pair of handlebar end mirrors in "Victory design". 
The mirror arm and the mirror body are both made of high-quality aluminium and anodized in black.

Fitting the mirrors is actually quite simple.

• First check whether your handlebar grips are open at the end, if handlebar weights are fitted, this is certainly the case. If not, you will have to cut the grips open at the end.
• For vehicles with a thread in the handlebars, you only need to remove the rubber on the mirror thread, then you can simply screw the mirror into the existing thread (only for M6 threads).
• If the handlebar is hollow, you have to pretension the rubber a little with the nut and bolt. If the rubber is too thin, some black insulating tape can help you to enlarge the rubber. Then simply push it into the handlebars with a little pre-tension and tighten it with the hexagon socket screw. 
• The angle of the mirror can then be adjusted according to preference.
• Finally, tighten the adjusting screw and you're done.

Note

• The mirrors have an E-test number and are therefore legal without having to be registered.

Scope of delivery

• 2 mirrors
• Mounting material