1. Choose model
CB 125 R (ab 2024, JC 95 Euro5+)
CB 125 R (2021 bis 2023, JC91 Euro5)
CB 125 R (2018 bis 2020, JC79 - Euro4)
2. Filter by category
No results were found for the filter!
The Polisport Silencer Protector provides excellent protection for your muffler from bumps and drops and looks great doing it: Made from a blend of silicone and metal Easy to install without the need for mounting hardware The thick...
Available
€40.95
*
;
From €29.95
*
The Polisport Silencer Protector provides excellent protection for your muffler from bumps and drops and looks great doing it: Made from a blend of silicone and metal Easy to install without the need for mounting hardware The thick...
Almost gone
€39.95
*
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Available
€9.99
*
The Polisport Armadillo is a universal 4-stroke exhaust protector made of stainless steel and silicone. The use of elastomers reduces vibration noise and is resistant to high temperatures. The universal mounting system, with pipe clamps...
Available
€59.90
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Replacement dB-Killer for different Arrow Thunder exhaust silencers. Please compare dimensions! Technical data length: 200mm diameter 1: 45mm diameter 2: 26mm Number of holes: 6 A single dB killer is delivered.
Available
€59.95
*
Available
€7.49
*
Heat protection film, multiple sizes
Self-adhesive heat protection films in various sizes and thicknesses. The film consists of a heat-resistant fibreglass fabric in combination with a thin, reflective aluminium foil and is indispensable for all plastic trim parts near the...
Available
From €5.99
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Exhaust heat protection tape, Grey, 50mm wide x 10m long
Heat protection tape is primarily used to protect against burns. But especially with 2-stroke exhaust systems it has even a performance-enhancing Effect. Because 2-stroke Exhaust systems are very sensitive to temperature fluctuations....
Almost gone
€30.95
*
Available
€1.59
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Available
€1.99
*
As a spare part, or for tuners who want to build their own manifold to increase the performance of the engine, we offer here, in addition to the complete set, the rear silencer of the Arrow X-Cone in the black version with carbon cap...
Almost gone
€391.00
*
;
€293.90
*
Elbow pipe from Arrow incl. slide-in catalytic converter. Of course all components are made of stainless steel. So the exhaust is still presentable even after a long time. Due to the included catalyst everything is also legally in order....
Available
€329.00
*
It can always happen, even with stable carbon, that something gets broken, scratched, or even breaks. For those who cannot or do not want to live with this, we offer a "halfway" moderate solution for replacement. Even if the rear...
Almost gone
€442.00
*
;
€309.90
*
Single version of the Honda CB 125 R rear silencer. Arrow uses in this version a black aluminium cover and a simple stainless steel end cap. A separately available manifold is required for mounting. We also offer the exhaust here in the...
Almost gone
€299.90
*
;
€224.90
*
Mounting rubber for exhaust systems, universal
Technical data Length pin/bolt: 53mm Diameter bolt: 8mm length rubber element: 19mm
Available
€6.49
*
Stud bolt, M6x27
Outlet stud with M6 thread on both sides. As a replacement for torn out or over-turned studs. The bolt is galvanized and has a total length of 27mm. A single bolt is supplied.
Available
€0.59
*
Exhaust stud & nuts set, M6 x M6 - 2 pieces
Again and again annoying with torn or heavily rusted exhaust bolts? With this set this problem can now be solved. The set consists of 2 bolts with the dimension M6xM6 as well as the collar nuts.
Available
€2.99
*
Viewed