1. Choose model
CB 500 F/R (2017 bis 2018, PC57/58)
2. Filter by category
No results were found for the filter!
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...
Available
€2.49
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...
Available
€2.99
*
Kupferdichtring, Kupfer, 14x18x1,5, f. Thermoschalter / Universal
Universell einsetzbarer Kupferdichtring mit den Maßen 14x18x1,5. Wird idr. bei Piaggio/Derbi/Aprilia Motoren als Dichtung für den Thermoschalter verwendet. Kann aber für jegliche andere Möglichkeit Anwendung finden.
Available
€2.79
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Available
€9.99
*
Improve your motorcycle experience with the Uma Racing quick shift lever. This innovative accessory allows you to shift gears without the need for the clutch, while protecting your motorcycle transmission. Installation is as easy as can...
Almost gone
€259.90
*
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. The clip is used in various places for various bikes. An example on Yamaha motorcycles is the water pump. OEM part number for comparison purposes 990091040000,...
Available
€1.99
*
Needle roller bearing / Gearbox bearing / Shift drum bearing / Shaft bearing, universal, 10x10x14
This article is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
ProTaper clutch fitting made of cold forged aluminum. The clutch fitting comes with quick adjustment as well as a bearing forged aluminum lever. The nylon ring on the clamping surface can prevent the armature from breaking in the event...
Out of Stock
€56.95
*
Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...
Available
€9.99
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€3.49
*
Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m
Available
€3.99
*
Available
€10.99
*
Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...
Available
€14.99
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...
Available
€5.99
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Replacement rubber from Athena. In case of oil leaks, or adjustment work on the open cylinder head, gaskets should be replaced as a precaution. This rubber seals screw holes. Delivery 1st piece.
Available
€2.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Viewed