Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Honda CBF 125 Cooling system

1. Choose model
CBF 125 (2009 bis 2016)
Filter
Close filters
No results were found for the filter!
Clamp
Clamp, universal, for example f. petrol, water or oil hoses, 6mm
6mm clamp for fuel hoses. Delivered is 1 piece.

Available

€1.99 *
Hose clamp
Hose clamp, large, d=32mm, stainless
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.

Available

€1.29 *
Cooling water hose transparent
Cooling water hose transparent, with steel spiral, d=19x26mm, 1 meter
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...

Available

€14.99 * ; From €9.99 *
Kupferdichtring Kupferdichtring, Kupfer, 14x18x1,5, f. Thermoschalter / Universal
Universell einsetzbarer Kupferdichtring mit den Maßen 14x18x1,5. Wird idr. bei Piaggio/Derbi/Aprilia Motoren als Dichtung für den Thermoschalter verwendet. Kann aber für jegliche andere Möglichkeit Anwendung finden.

Available

€2.79 *
Mounting bracket Schmitt Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...

Almost gone

€9.99 *
Dichtung Wasserpumpendeckel Honda OEM
Dichtung Wasserpumpendeckel Honda OEM, Honda KPP1 Motoren

Out of Stock

€6.18 *
Shaft circlip Yamaha OEM
Shaft circlip Yamaha OEM, universell
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. The clip is used in various places for various bikes. An example on Yamaha motorcycles is the water pump. OEM part number for comparison purposes 990091040000,...

Available

€1.99 *
Cooling water hose Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...

Available

€9.99 *
Cooling water hose Cooling water hose, universal, black
Dimensions: 12mm x 19mm Length: 1m

Available

€10.99 *
Cooling water hose Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...

Available

€14.99 *
Clamps / hose clamps Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.

Available

€34.95 *
Thermostat Honda OEM
Thermostat Honda OEM, Honda CBR 125 (JC34A, JC39A/B, JC50A/B), original spare part
Standard Honda thermostat for KPP1E engines. Original spare part OEM part number for comparison purposes 19300GEE003

Available

€49.95 *
Hose clamp Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...

Available

€5.99 *
Hose clamp assortment Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm

Available

€27.95 *
Clamp Piaggio OEM
Clamp Piaggio OEM, Universal, D= 18mm
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072

Available

€4.99 *
Temperature sensor adapter Koso
Temperature sensor adapter Koso, various sizes
If you don't want to change the thermometer in the cylinder head, or the thread doesn't fit, we can offer you this nice anodized adapter which is simply put between the cooling hose. Fits in combination with Stage6 Multimeter & Koso PRO...

Available

€28.95 *

The cooling system of your Honda CBF 125 has an important task. It ensures that your bike does not overheat even under overheating even under heavy load. For this to work, the cooling system must function correctly. function properly. In the event of strong vibrations, the filigree cooling fins of the radiator can crack and leak. leakage can occur. Then you can find a replacement Kühler für your motorcycle.

Even more common, however, is that it comes with älteren CBF 125 to cracks in the Kühlwasserschlauch, or the the thermostat no longer works correctly. If it runs completely blöd, lässt you your cooling water cap somewhere. For all these problems on the cooling system of your CBF 125, we have the suitable spare parts.

Viewed