Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Honda CBR 125 Cooling system

1. Choose model
CBR 125 (2011 bis 2019, JC50 - Euro3)
CBR 125 (2004 bis 2010, JC34/39)
Close filters
1 From 2
No results were found for the filter!
Clamp
Clamp, universal, for example f. petrol, water or oil hoses, 6mm
6mm clamp for fuel hoses. Delivered is 1 piece.

Available

€1.99 *
Hose clamp
Hose clamp, large, d=32mm, stainless
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.

Available

€1.29 *
Cooling water hose transparent
Cooling water hose transparent, with steel spiral, d=19x26mm, 1 meter
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...

Available

€14.99 * ; From €9.99 *
NEW
Stift Wasserpumpenwelle Honda OEM
Stift Wasserpumpenwelle Honda OEM, Honda Motor KPP1E - Maße 4x23.8 (CB 125 R Bj.18-20, CBR 125 Bj.11-19)
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Honda OEM Artikelnummer zu Vergleichszwecken : 9622040238 Lieferumfang: 1

Almost gone

€0.69 *
NEW
Shaft water pump Honda OEM
Shaft water pump Honda OEM, Honda KPP E-1 4-T Motor (CBR 125, CB 125 R)
This article is an original spare part (OEM) from Honda OEM part number for comparison purposes : 19241KGH900 Scope of delivery: 1

Almost gone

€9.99 *
NEW
Water pump oil seal 12x20x5 Honda OEM
Water pump oil seal 12x20x5 Honda OEM, Honda KPP E-1 4-T Motor (CBR 125, CB 125 R), 12x20x5
This article is an original spare part (OEM) from Honda OEM part number for comparison purposes : 91205KF0003 Scope of delivery: 1

Almost gone

€3.99 *
NEW
Gasket (mechanical) water pump Honda OEM
Gasket (mechanical) water pump Honda OEM, Honda KPP E-1 4-T Motor (CBR 125, CB 125 R)
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Honda OEM Artikelnummer zu Vergleichszwecken : 19217P72013 Ersetzt die Artikelnummern: 19217PH9003; 19217PH9013; 19217PA5003 Lieferumfang: 1

Almost gone

€69.95 *
NEW
Impeller water pump Honda OEM
Impeller water pump Honda OEM, Honda KPP E-1 4-T Motor (CBR 125, CB 125 R)
This article is an original spare part (OEM) from Honda OEM part number for comparison purposes : 19215KGH900 Scope of delivery: 1

Almost gone

€13.99 *
Kupferdichtring Kupferdichtring, Kupfer, 14x18x1,5, f. Thermoschalter / Universal
Universell einsetzbarer Kupferdichtring mit den Maßen 14x18x1,5. Wird idr. bei Piaggio/Derbi/Aprilia Motoren als Dichtung für den Thermoschalter verwendet. Kann aber für jegliche andere Möglichkeit Anwendung finden.

Available

€2.79 *
Mounting bracket Schmitt Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...

Available

€9.99 *
Shaft circlip Yamaha OEM
Shaft circlip Yamaha OEM, universell
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. The clip is used in various places for various bikes. An example on Yamaha motorcycles is the water pump. OEM part number for comparison purposes 990091040000,...

Available

€1.99 *
Cooling water hose Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...

Available

€9.99 *
Cover thermostat housing Honda OEM
Cover thermostat housing Honda OEM, Honda CBR 125 R year of construction 04-19, CB 125 R from year of construction 18...
This item is an original spare part of the Honda brand. OEM number for comparison purposes: 19315KGH900

Almost gone

€3.99 *
Cooling water hose Cooling water hose, universal, black
Dimensions: 12mm x 19mm Length: 1m

Available

€10.99 *
Cooling water hose Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...

Available

€14.99 *
Expansion tank cooling system Honda OEM
Expansion tank cooling system Honda OEM, Honda KPP1E Engine (CBR 125, CB 125 R, JC34/39, JC50, JC79)
This item is an original spare part (OEM) of the Honda brand. OEM part number for comparison purposes 19110KPP930 Scope of delivery: 1 pc.

Almost gone

€20.95 * ; €16.95 *
Clamps / hose clamps Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.

Available

€34.95 *
Thermostat Honda OEM
Thermostat Honda OEM, Honda CBR 125 (JC34A, JC39A/B, JC50A/B), original spare part
Standard Honda thermostat for KPP1E engines. Original spare part OEM part number for comparison purposes 19300GEE003

Available

€49.95 *
Cooler JMP
Cooler JMP, Honda CBR 125 (JC50A/B)
Aluminium replacement cooler for Honda CBR 125 models of the JC50 series. Due to the design of motorcycles, it is necessary to change the radiator more often, as they are hit by stones much more often than, for example, the radiator of a...

Almost gone

€129.90 *
Hose clamp Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...

Available

€5.99 *

Almost gone

€1.99 *
Hose clamp assortment Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm

Almost gone

€27.95 *
1 From 2

The cooling system of your Honda CBR 125 has an important task. It ensures that your bike does not overheat even under overheating even under heavy load. For this to work, the cooling system must function correctly. function properly. In the event of strong vibrations, the filigree cooling fins of the radiator can crack and leak. leakage can occur. Then you can find a replacement Kühler für your motorcycle.

Even more common, however, is that it comes with älteren CBR 125 to cracks in the Kühlwasserschlauch, or the the thermostat no longer works correctly. If it runs completely blöd, lässt you your cooling water cap somewhere. For all these problems on the cooling system of your CBR 125, we have the suitable spare parts.

Viewed