1. Choose model
CBR 125 (2011 bis 2019, JC50 - Euro3)
CBR 125 (2004 bis 2010, JC34/39)
2. Filter by category
No results were found for the filter!
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
choke lever, Universal, various colors, for mounting on handlebars
Universal choke lever for custom conversions. Simple mounting with clamp, directly on the handlebars as mentioned, fits virtually any cable choke. Available in black & chrome.
Available
€10.99
*
Standard Honda thermostat for KPP1E engines. Original spare part OEM part number for comparison purposes 19300GEE003
Out of Stock
€49.95
*
Valve cover gasket for Honda KPP1E engines. Original spare part OEM part number for comparison purposes 12391KGH901
Almost gone
€12.99
*
Carburettor DellOrto PHBH 28 BS, universal
The PHBH 28mm version can be used as a replacement carburettor on various 125cc vehicles (e.g. RS 125). On 125s with a smaller carburettor, it can even have a slight performance-enhancing effect if tuned correctly. Note Does NOT have an...
Available
€139.90
*
Aluminium replacement cooler for Honda CBR 125 models of the JC50 series. Due to the design of motorcycles, it is necessary to change the radiator more often, as they are hit by stones much more often than, for example, the radiator of a...
Almost gone
€129.90
*
Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...
Available
€5.99
*
Paper gasket from Athena. Suitable for all Honda KPP engines, e.g. Honda CBR 125 (JC34A, JC39A/B, JC50A/B) & Honda CB 125 R. Athena, an international company founded in 1973. Mainly Athena designs and manufactures gaskets, technical...
Available
€8.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Replacement rubber from Athena. In case of oil leaks, or adjustment work on the open cylinder head, gaskets should be replaced as a precaution. This rubber seals screw holes. Delivery 1st piece.
Available
€2.99
*
Small component with great effect. The valve stem seals influence for example the oil consumption. Hard "stems" let oil run down the valve, which is then burned. For any work on the dismantled cylinder head, it is anyway recommended to...
Available
€7.49
*
;
€5.99
*
Spare sealing ring from Athena.
Almost gone
€1.99
*
Athena, an international company founded in 1973, designs and manufactures gaskets, technical spare parts and metal components for the industrial and motorcycle sector to the highest quality standards. Athena gaskets are therefore the...
Available
€10.99
*
Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Out of Stock
€13.95
*
Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm
Available
€27.95
*
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072
Available
€4.99
*
Available
€1.99
*
Available
€1.49
*
Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm
Available
€2.99
*
Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...
Almost gone
€8.49
*
Viewed