1. Choose model
XL 125 Varadero (2001 bis 2010)
XL 125 Varadero (2011 bis 2013)
No results were found for the filter!
This simple but effective clamp can increase your handlebar intake on almost all bikes! made of high quality CNC aluminum Handlebar mounts for Ø22 mm handlebars Increase the handlebar by about 20mm
Available
€29.95
*
With the Motoflow handlebar clamps you give your handlebar an extra look through the red CNC machined aluminum. Your handlebar is raised a few centimeters, which can improve posture and thus prevent back pain. Due to the inner diameter...
Available
€29.95
*
Color matching, CNC milled 28.5mm handlebar mounts for the perfect finish on your bike! The mount is completely CNC machined and anodized afterwards. Available in different colors. Scope of delivery: 2pcs.
Available
€29.95
*
;
From €9.99
*
Von Radical bieten wir dir hier ein Bulge Barpad für Fatbar-Lenker an. Das Pad besteht wie üblich aus zwei Teilen. Dem bedruckten Sleeve und dem Schaumstoff. Je nach Abstand deiner Lenkerklemmen kann der Schaumstoff und auch das Sleeve...
Available
€19.90
*
;
€9.99
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations are only very slightly pronounced in the 125 class motorcycles anyway, it is not necessary to perform vibration dampers as absorber...
Available
€14.99
*
;
From €9.99
*
Fits 28.5mm handlebars. The handlebar is quite flat on this version. Of course, there is also the matching intake or the matching adapter for the standard 22mm handlebar mounts. The intake is completely CNC machined and anodized...
Available
€29.95
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations occur only very slightly on most 125s anyway, it is not necessary to design vibration dampers as absorber weights. Here we can offer...
Available
€17.99
*
;
€12.99
*
If you change your handlebars, you usually need new grips right away. In addition, a barpad is obligatory after mounting a downhill handlebar anyway. After all, what is a nice handlebar without a nice pad? In this practical bundle we...
Available
€39.95
*
If you change your handlebars, you usually need new grips at the same time. In addition, a barpad is obligatory after mounting a downhill handlebar. After all, what is a nice handlebar without a nice pad? In this practical bundle we have...
Available
€39.95
*
Features Scratch-resistant screen printing with foam backing Length : 24cm
Available
€14.99
*
;
€9.99
*
NEW
Barpad KRM Holo, für Oversize Lenker, verschiedene Farben
Barpad aus dem Hause KRM mit holografischem Logo in der beliebten Neo-Chrom Optik. Verwendbar bei allen Oversize Bars
Out of Stock
€29.90
*
NEW
Barpad KRM, different colors
Round standard bar pad from KRM. Suitable for all downhill handlebars with center brace. Available in many different colors!
Available
€15.99
*
Handlebar riser CNC, 22mm, versch. Heights, incl. screws
Due to the slotted holes suitable for almost all mopeds and enduros! made of high quality CNC aluminum Handlebar mounts for Ø22 mm handlebars Increase the handlebar by 25/35mm
Available
€49.95
*
The color selection was matched exactly to the 28.6mm cross handlebars from Stage6 range! The clamps fit but also on other 28mm handlebars. The handlebar clamps are CNC machined and anodized in color, with lasered logo on the top (2...
Available
€45.95
*
The pads are made of an extra-light, high-density foam to reduce the risk of injury to the driver. The extremely durable plastic covers remain as fresh in color as the first day, even after frequent high-pressure washing. Dimensions:...
Available
€29.95
*
ProTaper handlebar pad in black suitable for motorcycle handlebars / off-road handlebars with cross brace The ProTaper pad / shock pad is 20.3cm long and has a Velcro closure and is therefore super easy to mount on the handlebar.
Available
€19.99
*
Handlebar foam MOST, 28,6 mm, universal, versch. Colors
From the design champion MOST there is a new bar pad for your oversize handlebar. The pad comes in 4 different colors and can be shortened with a cutter knife to the appropriate width. It is attached with a Velcro closure and is intended...
Available
€19.95
*
The handlebar clamps from Voca Racing can easily be changed from 22mm to 28mm handlebars. Ultra light design, aggressive look and high quality aluminium - this best describes the new Voca handlebar clamps. The complete set consists of...
Almost gone
€43.95
*
Available
€14.95
*
Handlebar mount, 22.2mm or 28.6mm, universal, aluminium
To mount e.g. oversize handlebars a special mount in the size 28,6mm is necessary. We can offer you such a version. The handlebar clamps in the size 22,2mm are suitable for all downhill handlebars with standard diameter.
Available
€33.95
*
Viewed