1. Choose model
SMR 125 (2011 bis 2013, A500AB)
2. Filter by category
No results were found for the filter!
Rocker arm set, Yamaha / Minarelli YI 4-Takt Motoren
The rocker arms operate the valves in the 4-stroke cylinder head. Since the part actuated by the camshaft is mounted is mounted on ball bearings it is mechanical exposed to mechanical wear. These rocker arms are the perfect & cheap...
Available
€39.90
*
Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
choke lever, Universal, various colors, for mounting on handlebars
Universal choke lever for custom conversions. Simple mounting with clamp, directly on the handlebars as mentioned, fits virtually any cable choke. Available in black & chrome.
Available
€10.99
*
Carburettor DellOrto PHBH 28 BS, universal
The PHBH 28mm version can be used as a replacement carburettor on various 125cc vehicles (e.g. RS 125). On 125s with a smaller carburettor, it can even have a slight performance-enhancing effect if tuned correctly. Note Does NOT have an...
Available
€139.90
*
Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...
Available
€5.99
*
Yamaha original spare part.
Available
€4.95
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Out of Stock
€13.95
*
Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm
Available
€27.95
*
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072
Available
€4.99
*
Available
€1.99
*
Available
€1.49
*
Original replacement chain tensioner from Yamaha. Fits Yamaha YZF-R125. OEM part number for comparison purposes 5LWE22100000
Available
€89.95
*
If the timing chain tensioner is replaced, it may be necessary to renew its seal as well. Here we offer this spare part original from Yamaha. OEM part number for comparison purposes 1DYE22130000
Available
€4.24
*
The timing chain rails perform an important task in the engine, as they protect the chain from contact with the housing and thus prevent increased wear. Unfortunately, however, these components themselves are subject to high stress. If...
Available
€9.99
*
The timing chain of modern 4-stroke engines is, compared to a timing belt, actually maintenance-free. However, at high mileage or other maintenance work, it may be useful to replace the chain. We offer here an original timing chain for...
Available
€27.95
*
The timing chain rails perform an important task in the engine, as they protect the chain from contact with the housing and thus prevent increased wear. Unfortunately, however, these components themselves are subject to high stress. If...
Available
€11.90
*
Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm
Available
€2.99
*
Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...
Almost gone
€8.49
*
Spring clip for fuel line
Spring clip for a tight fit of the fuel hose on the fuel tap and carburetor connection. 8,8 - 9,5mm
Available
€2.99
*
If you don't want to change the thermometer in the cylinder head, or the thread doesn't fit, we can offer you this nice anodized adapter which is simply put between the cooling hose. Fits in combination with Stage6 Multimeter & Koso PRO...
Available
€28.95
*
Viewed