2. Filter by category
No results were found for the filter!
The "PowerTRONIC V4 " is one of the most advanced "piggyback control units" with full range of functions for motorcycles currently available worldwide. "Piggyback" in this case means that this control module is used in addition to the...
Available
€459.90
*
This article is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
Out of Stock
€16.80
*
ProTaper clutch fitting made of cold forged aluminum. The clutch fitting comes with quick adjustment as well as a bearing forged aluminum lever. The nylon ring on the clamping surface can prevent the armature from breaking in the event...
Out of Stock
€56.95
*
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...
Available
€9.99
*
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€3.49
*
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m
Available
€3.99
*
Available
€10.99
*
The EBC standard clutch plates correspond to the original plates in dimension and quantity. The lining material is cork-based with a high aluminum content to reduce wear and fading to a minimum. The high density material prevents pad...
Almost gone
€35.95
*
This item is an original spare part of the brand KTM. OEM part number for comparison purposes: 90130082000
Almost gone
€24.95
*
Hopefully it does not happen to you - but if you ever need a new crankshaft, we have some in stock. This item is an original spare part of the brand KTM. OEM part number for comparison purposes: 90130018000
Almost gone
€367.90
*
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...
Available
€14.99
*
Bei diesem Artikel handelt es sich um ein Originalersatzteil der Marke KTM. OEM Artikelnummer zu Vergleichszwecken: 90135053000
Almost gone
€9.99
*
This item is an original spare part (OEM) of the brand KTM. OEM part number for comparison purposes 90136003000 Scope of delivery: 1 pc.
Out of Stock
€59.95
*
This article is an original spare part (OEM) of the manufacturer of the brand KTM.
Available
€2.19
*
This item is an original spare part (OEM) of the brand KTM. OEM part numbers for comparison purposes - KTM 90136003003 Scope of delivery: 1 pc.
Available
€2.99
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
Reinforced clutch springs from EBC, 10% harder than the original springs. Provides relief for slipping clutches by increasing performance.
Out of Stock
€15.50
*
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...
Available
€5.99
*
Replacement seal from Athena. In case of oil leaks or adjustment work on the open cylinder head, gaskets should be replaced as a precaution.
Almost gone
€22.95
*
Replacement rubber from Athena. In case of oil leaks, or adjustment work on the open cylinder head gaskets should be replaced as a precaution. This rubber seals screw holes. Delivery 1 piece.
Almost gone
€3.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Viewed