1. Choose model
TR 125 SM/X (2013 bis 2018)
No results were found for the filter!
NEW
Replacement clamp for your Radical rear silencer
Out of Stock
€19.99
*
For retrofitting, or as a spare part, we offer you here an exhaust decor for the Radical Racing Supermoto rear silencer (Inox , Half / Full Carbon). The decor can be easily glued to the ESD. Due to a special lamination of the film, the...
Available
€9.99
*
;
From €5.99
*
Replacement mounting plate with 2 screws. Used for mounting GP-Pro exhaust systems on Yamaha YZF-R 125 and MT 125 from Bj. 2021. But can also be used as a bracket for tinkering with all sorts of other uses. Technical data Dimensions:...
Available
€2.49
*
Spare part for Arrow exhaust systems.
Available
€9.99
*
Simple exhaust spring, to hang the exhaust system on the cylinder, or to connect the muffler & manifold. Can also be used for other tinkering. The spring has ring eyelets at both ends. A little trickier to fit, but the hold is better!...
Available
€2.59
*
Exhaust systems become louder with increasing age. One reason for this is that impurities from the engine, such as combustion residues, are deposited in them. In the same way it can also happen that insulation wool comes off the exhaust...
Available
€6.99
*
Exhaust plugs are used during transport and mothballing of motorcycles to prevent rainwater from entering the exhaust system. This exhaust plug from Radical comes with a Remove before Ride Keylace.
Available
€6.99
*
Cover cap for the mounting screw of the dB-Killer of SBK and LV-One exhaust systems.
Almost gone
€9.99
*
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Available
€9.99
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Available
€7.49
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Available
€1.59
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Available
€1.99
*
Mounting rubber for exhaust systems, universal
Technical data Length pin/bolt: 53mm Diameter bolt: 8mm length rubber element: 19mm
Available
€6.49
*
Stud bolt, M6x27
Outlet stud with M6 thread on both sides. As a replacement for torn out or over-turned studs. The bolt is galvanized and has a total length of 27mm. A single bolt is supplied.
Available
€0.59
*
Exhaust stud & nuts set, M6 x M6 - 2 pieces
Again and again annoying with torn or heavily rusted exhaust bolts? With this set this problem can now be solved. The set consists of 2 bolts with the dimension M6xM6 as well as the collar nuts.
Available
€2.99
*
Exhaust stud & nuts set, M8 x M8 - 10 pieces
Again and again annoyance with torn or heavily rusted exhaust bolts? with this set from Motoflow this problem can now be solved. The set consists of 10 bolts with the dimension M8xM8 as well as the collar nuts.
Available
€12.99
*
Viewed