2. Filter by category
No results were found for the filter!
NG is one of the few manufacturers to provide all brake discs with a KBA approval, which is why they can be driven on public roads without any problems. The general type approval of the German Federal Motor Transport Authority (KBA) is...
Almost gone
€72.95
*
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.
Almost gone
€10.99
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€9.99
*
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm
Available
€5.49
*
Diese Schrauben werden idr. als Bremsscheiben-, oder Kettenradschrauben verwendet. Inkl. trockener Schraubensicherung (blau - mittelfest). Gewinde: M8 Kopf: Flach / TX Länge: 18 mm
Available
€2.49
*
All brake discs from TRW have an ABE, are low-wear and have up to 30% longer life compared to some comparable spare parts. All discs are made of extremely dimensionally stable and hardened steel. The precise surface grinding (thickness...
Almost gone
€109.90
*
All brake discs from TRW have an ABE. The brake discs are inherently low-wear and have up to 30% longer life compared to some comparable spare parts. All discs are made of extremely dimensionally stable and hardened steel. The precise...
Almost gone
€129.90
*
These EBC brake pads are provided with aramid fibres, which are 6 times stronger than steel, and of course they are completely asbestos-free. In the production of EBC generally only low-emission components are used. These materials also...
Almost gone
€29.90
*
Since the original screw can no longer be used with AJP brake calipers, we offer you here a suitable screw to order. Please take the thread dimension from the article description of the caliper.
Available
€3.59
*
Since the original screw can no longer be used with AJP brake calipers, we offer you here a suitable screw to order. Please take the thread dimension from the article description of the brake caliper.
Available
€3.99
*
CNC milled brake fluid reservoir incl. handlebar mount. Available in different colours.
Almost gone
€18.90
*
The brake disc is a wear part, as is the brake pad itself. Over time it wears out and becomes thinner and thinner. A too thin brake disc does not take up the temperature properly, which develops when braking. The consequence can be a...
Almost gone
€92.95
*
Copper paste is used for the highest temperatures in screw connections and interfaces, e.g. exhaust screws, spark plug threads and brakes, to prevent corrosion and ensure subsequent disassembly. Operating temperature range: - 40 °C to +...
Available
€8.99
*
Cable clip for the safe laying of brake hoses, cables, speedo cables or various trains. The mounting hole has a diameter of 6mm, so it can be mounted under nearly every screw up to 6mm.
Available
€5.49
*
Technical data Outside diameter: 230 mm Inner diameter: 104 mm bolt circle: 124 mm Number of mounting holes: 6 Mounting hole: 10 mm Sink: flat thickness: 4 mm Notes Due to the large number of differently used rims, it is not always...
Almost gone
€66.95
*
Anti-squeak foil / noise damping foil for brake pads. The foil is glued to the back plate of the brake pads and thus ensures less vibration, protects the brake pistons and reduces squeaking noises during braking. Scope of delivery: 4...
Available
€9.99
*
Available
€2.49
*
Available
€1.99
*
Available
€2.49
*
Presto Copper Paste is a soft, copper-coloured multi-purpose paste for release lubrication at high temperatures, high pressure loads and corrosive influences. Even after a long period of operation and under extreme conditions, the parts...
Available
€7.99
*
SAE J 1703; ISO 4925; DOT 3 & DOT 4 Fully synthetic brake fluid from Motul based on polyglycol for all hydraulic disc and drum brake systems. Mixable with all commercially available brake fluids. Brake fluid should be changed completely...
Available
€9.99
*
Available
€4.29
*
The brake pad from Galfer standard for the KTM Duke 125 and Yamaha WR 125 machines from 2009 onwards is suitable for the rear brake. The brake pad has the dimensions of 78 x 40.8 millimetres and a thickness of 9 millimetres. Galfer...
Available
€19.99
*
Tune your motorcycle with the simplest means! Even the standard brake pad from Galfer offers excellent performance. In the low to medium temperature range, as you reach it when riding in town or overland, the best braking effect is...
Available
€15.99
*
Viewed