1. Choose model
Duke 125 (ab 2024)
Duke 125 (2021 bis 2023, IS DUKE - Euro5)
Duke 125 (2017 bis 2020, IS DUKE - Euro4)
Duke 125 (2011 bis 2016, Euro3)
No results were found for the filter!
NEW
Einfaches und effektives Optiktuning für den kleinen Geldbeutel. es müssen keine Verkleidungsteile verändert werden wird an originalen Punkte befestigt perfekte Passform stilvolle Optik und optimaler Schutz einfache Montage
Available
€15.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...
Available
€14.99
*
;
From €9.99
*
Kupferdichtring, Kupfer, 14x18x1,5, f. Thermoschalter / Universal
Universell einsetzbarer Kupferdichtring mit den Maßen 14x18x1,5. Wird idr. bei Piaggio/Derbi/Aprilia Motoren als Dichtung für den Thermoschalter verwendet. Kann aber für jegliche andere Möglichkeit Anwendung finden.
Available
€2.79
*
Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...
Almost gone
€9.99
*
Out of Stock
€6.18
*
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. The clip is used in various places for various bikes. An example on Yamaha motorcycles is the water pump. OEM part number for comparison purposes 990091040000,...
Available
€1.99
*
Radiator grille / radiator grille, KTM Duke / RC 125/200/390
For a more aggressive look of your KTM there is now a MAD radiator grille! Simple but efficient optics tuning a'la Radical Racing. no fairing parts have to be changed will be fixed at original points perfect fit stylish optics and...
Available
€49.95
*
Out of Stock
€28.87
*
Out of Stock
€141.69
*
Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...
Available
€9.99
*
Available
€10.99
*
Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...
Available
€14.99
*
Bei diesem Artikel handelt es sich um ein Originalersatzteil der Marke KTM. OEM Artikelnummer zu Vergleichszwecken: 90135053000
Almost gone
€9.99
*
Experience has shown that the water pump sealing rings are a weak point in motorcycle engines. As soon as the oil in the gearbox takes on a milky, dull colour, you should check whether the Simmerrings of the water pump are still properly...
Almost gone
€25.95
*
The coolant thermostat is an important part of the cooling system. If it no longer opens or closes correctly, the engine can overheat or undercool while driving. In the worst case, this can lead to engine damage. Therefore, you should...
Available
€31.95
*
Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...
Available
€5.99
*
Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm
Available
€27.95
*
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072
Available
€4.99
*
Handmade radiator with 20% more cooling capacity suitable for KTM 125 Duke & 390. With this cooler, different material thicknesses are used. In places subject to particularly high stress, such as brackets, the material is stronger and...
Almost gone
€189.90
*
If you don't want to change the thermometer in the cylinder head, or the thread doesn't fit, we can offer you this nice anodized adapter which is simply put between the cooling hose. Fits in combination with Stage6 Multimeter & Koso PRO...
Available
€28.95
*
The cooling system of your KTM Duke 125 has an important task. It ensures that your bike does not overheat even under overheating even under heavy load. For this to work, the cooling system must function correctly. function properly. In the event of strong vibrations, the filigree cooling fins of the radiator can crack and leak. leakage can occur. Then you can find a replacement Kühler für your motorcycle.
Even more common, however, is that it comes with älteren Duke 125 to cracks in the Kühlwasserschlauch, or the the thermostat no longer works correctly. If it runs completely blöd, lässt you your cooling water cap somewhere. For all these problems on the cooling system of your Duke 125, we have the suitable spare parts.
Viewed