Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

KTM Duke 125 Suction & injection system

1. Choose model
Duke 125 (ab 2024)
Duke 125 (2021 bis 2023, IS DUKE - Euro5)
Duke 125 (2017 bis 2020, IS DUKE - Euro4)
Duke 125 (2011 bis 2016, Euro3)
Close filters
No results were found for the filter!
Clamp
Clamp, universal, for example f. petrol, water or oil hoses, 6mm
6mm clamp for fuel hoses. Delivered is 1 piece.

Available

€1.99 *
Fuel Hose
Fuel Hose, 1 meter, d=5mm, different colours
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...

Available

€2.99 *
Handlebar switch Race Dynamics Powertronic Handlebar switch Race Dynamics Powertronic, Universal for Power Tronic V4, Black
With the optional handlebar switch from Race Dynamics for the Powertronic V4 you can easily switch between the two power modes. This handlebar switch is suitable for any vehicle for which a Powertronic V4 tuning ECU is available, such as...

Available

€62.95 *
ECU Chiptuning Modul FuelX Lite ECU Chiptuning Modul FuelX Lite, KTM Duke 125 Bj. 12-16
Das einfachste und günstigste Tuningmodul von Racedynamics, welches simpel erklärt, das Signal der Original Lambdasonde umrechnet und ein verfälschtes Signal an das Original Motorsteuergerät übergibt. Durch diesen Eingriff wird die...

Almost gone

€219.90 *
ECU Chiptuning Modul FuelX Pro ECU Chiptuning Modul FuelX Pro, KTM Duke from year 12
FuelX is a state-of-the-art electronic plug-in fuel injection optimizer for modern engines. It automatically adjusts the engine to its best operating parameters by constantly monitoring, learning, and adjusting engine condition, wear,...

Available

€249.90 *
ECU Chiptuning Power Tronic V4 ECU Chiptuning Power Tronic V4, KTM Duke / RC 125 from year of construction 17 onwards
The "PowerTRONIC V4 " is one of the most advanced "piggyback control units" with full range of functions for motorcycles currently available worldwide. "Piggyback" in this case means that this control module is used in addition to the...

Available

€459.90 *
Oil hose Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m

Available

€3.49 *
Oil hose Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m

Available

€3.99 *
Benzinhahn Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....

Available

€10.99 *
Chiptuning Athena GET
Chiptuning Athena GET, KTM Duke 125 year 2011-2016
With the Athena GET Chiptuning, the original performance of the KTM Duke can be increased by a few extra horsepower, depending on which setup is used. The GET unit is simply exchanged for the original CDI control unit. Afterwards the...

Almost gone

€329.95 *
Oil hose Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm

Available

€2.99 *
Petrol tap Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...

Almost gone

€8.49 *
Spring clip for fuel line Spring clip for fuel line
Spring clip for a tight fit of the fuel hose on the fuel tap and carburetor connection. 8,8 - 9,5mm

Available

€2.99 *
Viewed