1. Choose model
Duke 125 (ab 2024)
Duke 125 (2021 bis 2023, IS DUKE - Euro5)
Duke 125 (2017 bis 2020, IS DUKE - Euro4)
Duke 125 (2011 bis 2016, Euro3)
No results were found for the filter!
Replacement clamp for your Radical rear silencer
Almost gone
€19.99
*
Replacement mounting plate with 2 screws. Used for mounting GP-Pro exhaust systems on Yamaha YZF-R 125 and MT 125 from Bj. 2021. But can also be used as a bracket for tinkering with all sorts of other uses. Technical data Dimensions:...
Available
€2.49
*
Spare part for Arrow exhaust systems.
Available
€9.99
*
Simple exhaust spring, to hang the exhaust system on the cylinder, or to connect the muffler & manifold. Can also be used for other tinkering. The spring has ring eyelets at both ends. A little trickier to fit, but the hold is better!...
Available
€2.59
*
Exhaust systems become louder with increasing age. One reason for this is that impurities from the engine, such as combustion residues, are deposited in them. In the same way it can also happen that insulation wool comes off the exhaust...
Available
€6.99
*
Exhaust plugs are used during transport and mothballing of motorcycles to prevent rainwater from entering the exhaust system. This exhaust plug from Radical comes with a Remove before Ride Keylace.
Available
€6.99
*
Spare connecting pipe from Arrow.
Available
€99.90
*
;
€74.95
*
Spare fuse ring for the dB-Killer of the Radical GP-Carbon. Technical data Ø= 50mm
Available
€9.49
*
Spare mounting kit for the KTM Duke Radical GP-Carbon.
Available
€25.95
*
Replacement intermediate pipe, or assembly pipe from Arrow. Suitable for KTM Duke 125 (model until 2016). The pipe is mandatory if a single Arrow rear silencer is to be mounted on the Duke.
Available
€129.90
*
;
€89.90
*
NEW
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 93805005100 Scope of delivery: 1
Available
€9.99
*
NEW
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 93805005000 Scope of delivery: 1
Available
€9.99
*
NEW
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 93805058100 Scope of delivery: 1
Available
€9.99
*
NEW
This article is an original spare part (OEM) from KTM OEM part number for comparison purposes : 93805058000 Scope of delivery: 1
Available
€9.99
*
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma KTM. OEM Artikelnummer zu Vergleichszwecken : 90105004000 Lieferumfang: 1
Available
€8.09
*
Standarddichtung (Kupfer) für den Auspuffkrümmer. OEM Artikelnummer zu Vergleichszwecken 18291MN5650 Ersetzt Artikelnummern: 18291216000; 182912160000; 18291306000; 18291HA7710; 18291KE5000; 18291KE8000; 18291KGAE00; 18291KSP901;...
Almost gone
€3.99
*
Cover cap for the mounting screw of the dB-Killer of SBK and LV-One exhaust systems.
Available
€9.99
*
Replacement clamp from LeoVince made of real carbon. According to the manufacturer, fits most LV-One and LV Pro exhaust systems for KTM models, such as the 14185E .
Almost gone
€44.95
*
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Available
€9.99
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Available
€7.49
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Viewed