1. Choose model
Duke 390 (2017 bis 2020)
No results were found for the filter!
Among our handlebar attachments is also a cover for the front brake cylinder. The cover consists of 2 parts, which are connected by the mounting screws. Both parts were CNC-milled and are made of aluminum. The cover is available in 3...
Available
€22.95
*
Footrest adapter pair from Radical Racing. These adapters allow Radical footrests to be attached to the vehicle. Suitable for all KTM Duke & RC models from 2011. Scope of delivery 1 pair of footrest adapters Mounting screws Footrests are...
Available
€22.95
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes and is quite simple. The footrests are delivered...
Available
€39.95
*
Spare footrest pair from Radical. Can be mounted on Radical Racing footrest adapters. Note Delivery WITHOUT footrest adapter!
Available
€22.95
*
These swingarm sliders can be mounted on the swingarm of the KTM Duke and protect the swingarm in case of a fall at particularly vulnerable points.
Available
€20.95
*
Styling adapter plate for the vehicle stand made of CNC milled aluminium. Anodized in black and orange and therefore perfectly matched to your KTM Duke! Easy mounting and quick optical upgrading. In addition, the footprint is increased...
Available
€21.95
*
Stand mounts are used to use motorcycle paddock stands with claw mounts. The stand holders are 2-part black and orange anodized.
Available
€12.90
*
Simple CNC milled styling part for KTM Duke or RC 125, the screw is located at the top of the clutch housing. Great optical effect for a small budget!
Available
€13.99
*
CNC milled cover of the water tank incl. seal. Anodized orange. Dimensions thread: 21mm height: 16mm Outside diameter: 22mm
Available
€15.95
*
Cheap part that will attract a lot of attention. This screw cap is suitable for the rear brake fluid reservoir of the KTM Duke 125, or the front reservoir of the Aprilia RS 125 and can be fitted in less than a minute. Note: The seal of...
Available
€18.95
*
;
From €9.99
*
Here we offer hand levers in a slightly shortened "Shorty" version. The levers do not affect the comfort while braking and clutch operation. Even the force to be applied during clutch operation does not have to be increased noticeably....
Available
€79.95
*
;
€39.95
*
The most visually dangerous valve caps you can buy. The new valve caps, in the design of a hand grenade, are a real eye-catcher. Available in different colours. Scope of supply: 1 pair.
Available
€2.99
*
NEW
The VOCA CNC handlebar clamp is the perfect choice for anyone who values precision, stability and an aggressive racing design. Manufactured from high-quality CNC-milled aluminum, this handlebar clamp not only ensures a first-class look,...
Available
€39.95
*
The footrest extension from Movetronix gives your passenger the opportunity for a more relaxed ride. The footrest extension is clamped to the footrest and therefore offers more space for the pillion rider's foot. The extension is made of...
Available
€129.90
*
Mirror thread cover caps, black, for M10 thread, CNC milled
Cover for threads of the original mirrors, if you install handlebar end mirrors on your motorcycle, the existing mounts remain unused. With this aluminum cover for M10 threads, you can discreetly conceal them.
Out of Stock
€10.99
*
Here we have new handlebar ends from Puig, the SHORTY. Milled from an aluminum block and available in seven different colors for you to choose from. The design combines the simplicity of the lines and the minimalism of the racing...
Available
€29.95
*
Here we have new handlebar ends from Puig, the SPEED. Milled from an aluminum block and available in seven different colors for you to choose from. The design combines the simplicity of the lines and the minimalism of the racing...
Available
€29.99
*
This headlight bracket is an essential part for mounting the universal LED headlight from Puig. It is made of high-quality CNC-milled aluminum and is therefore very robust and durable. In black, it matches the headlight very well and...
Almost gone
€146.99
*
The lever protection set serves to protect the lever from breaking or bending when falling. The set is made of sturdy aluminum and therefore provides effective protection against falls.
Almost gone
€44.95
*
Short-stroke throttle grip, universell, Chrom
The universal short-stroke throttle grip is used to shorten the throttle travel for complete throttle response. This allows you to grip the handlebars at a different, more comfortable angle and still have the full performance of the...
Almost gone
€32.95
*
Handlebar riser CNC, 22mm, versch. Heights, incl. screws
Due to the slotted holes suitable for almost all mopeds and enduros! made of high quality CNC aluminum Handlebar mounts for Ø22 mm handlebars Increase the handlebar by 25/35mm
Almost gone
€49.95
*
Locking bolt cylinder head Most Racing, M14x1,5, versch. Colors
This high quality aluminum sealing bolt with thread size M14x1.5 and matching copper sealing ring is an indispensable accessory for anyone looking for a reliable and durable sealing bolt. With its versatility, this bolt is perfect for...
Available
€17.95
*
Locking bolt cylinder head Most Racing, M12x1,5, versch. Colors
The aluminum locking bolts with thread size M12x1.5 and matching copper sealing ring are the perfect solution for closing holes, such as the temperature sensor hole on Derbi Euro4 models. Of course, the bolt is also suitable for other...
Available
€17.95
*
Brake cylinder Most, universal, 22mm, front, versch. Colors
MOST Racing hereby offers a radial CNC brake cylinder anodized in your favorite color! The assembly is very easy and fits all 22mm handlebars. Technical data: Type 3 or 4 fingers Adjustable Breakage protection Piston diameter 17.5 For...
Available
€99.95
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your KTM Duke 390 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the Duke 390. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed