1. Choose model
Duke 390 (2017 bis 2020)
2. Filter by category
No results were found for the filter!
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible, in many cases there is no way around replacement. Technical data Distance between the mounting holes: 50 mm...
Available
€27.95
*
Universally applicable clutch cable. Delivery includes universally usable clamps. Without cable sheathing.
Available
€4.49
*
Universal hand brake cylinder for the front disc brake. The complete fitting is delivered including brake lever and is equipped with a brake light switch. The brake cylinder is ideal for handlebar conversions and/or as an alternative...
Available
€22.95
*
Cheap part that will attract a lot of attention. This screw cap is suitable for the rear brake fluid reservoir of the KTM Duke 125, or the front reservoir of the Aprilia RS 125 and can be fitted in less than a minute. Note: The seal of...
Available
€18.95
*
;
From €9.99
*
Here we offer hand levers in a slightly shortened "Shorty" version. The levers do not affect the comfort while braking and clutch operation. Even the force to be applied during clutch operation does not have to be increased noticeably....
Available
€79.95
*
;
€59.95
*
As a little gimmick we can offer a CNC manufactured adjusting screw for e.g. clutch cables. The adjusting screw fits on all vehicles with M8 adjusting device.
Out of Stock
€11.95
*
Short-stroke throttle handles offer the possibility to reduce the angle of the pull to be pulled and thus the total travel. Particularly with larger carburettors from 19 mm upwards, the turning movement is significantly reduced and thus...
Available
€29.95
*
The universal repair set for the throttle cable and/or shift cable consists of two new cables with 2.5m length and various connections for cable attachment.
Available
€12.99
*
;
€8.79
*
NEW
Passenger footrests, Beta RR 125 from year 21, various colors Colors
This pillion footrest set incl. bracket is the ideal solution for anyone who wants both functionality and style on their bike. The footrests are CNC-milled and offer high precision and quick, uncomplicated installation. Perfectly matched...
Available
€77.95
*
NEW
Fork seal set SKF HD, Beta RR 2T 125/200/300/400 ab Bj 20
When developing the fork seals, SKF focused on maximum sealing performance and therefore uses the highest quality materials for fork seals and dirt wipers. The sealing kits from SKF offer a particularly low "stick-slip" effect - in other...
Almost gone
€35.95
*
NEW
Fork seal set SKF, Beta RR 2T 125/200/300/400 ab Bj 20
When developing the fork seals, SKF focused on maximum sealing performance and uses the highest quality materials for fork seals and dirt wipers. The sealing kits from SKF offer a particularly low "stick-slip" effect - in other words,...
Almost gone
€34.95
*
NEW
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
NEW
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
NEW
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
NEW
Sieht deine Gabel auch noch kahl und langweilig aus? Das kannst du jetzt ganz einfach ändern. Mit den Forkshrinks von Factoryfork, kannst du deine Gabel passend zu deinem Bike individualisieren. Die Schoner passen an alle gängigen Bikes...
Available
€49.95
*
NEW
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
NEW
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
NEW
Throttle cable intermediate tensioner, universell
This intermediate tensioner is a practical accessory for adjustments or simply to adjust the tension of a Bowden cable. With a spring travel of 18 mm, it enables precise adjustment of the cable tension.
Available
€1.50
*
Throttle grip 101 Octane, universal, with light switch & start button, color black
Here we offer you a universal twist grip with light switch and start button. However, you will have to make the matching Bowden cable yourself, also available from us. Handle length: 110mm Total length: 151mm Thread for throttle cable...
Almost gone
€21.95
*
Throttle grip 101 Octane, universal, with motorized kill switch
Universal twist throttle grip with engine on/off switch (kill switch). You have to build the matching throttle cable yourself, but of course you can also get these universal throttle cables from us. Grip length: 110mm Total length: 151mm...
Out of Stock
€21.95
*
Gas cable housing, 5mm x 1m, universal, various Colors
Universal gas cable cover in various colors 5mm x 1m
Available
€15.99
*
Dust caps from JMP with improved breakaway torque and lower friction due to special grease coating. Dimensions: 43x53.4x5.8/13mm Supplied in pairs .
Available
€14.99
*
With the right parts on your brakes, chassis, frame and suspension from your KTM Duke 390, you provide for the optimal driving experience and maximum safety.
"Who brakes later drives faster", you know. But then you should also have good brakes! Don't save at the wrong end and make sure that you regularly check the brake pads and discs on your Duke 390. Brake discs on your Duke 390 checks.
With the right levers and cables, you ensure a pleasant response when braking and clutching. clutch. This should not be underestimated, once you have sat in the saddle for half a day and pulled a few Hundred times on the lever has pulled, it can already be exhausting.
.
With the right fork and the optimal Stoßdämpfern on your KTM Duke 390, you provide für your perfect comfort. Or not, if you want to have more of a sporty seat and driving feel.
Viewed