1. Choose model
EXC 125 (1998 bis 2016)
2. Filter by category
No results were found for the filter!
Replacement clamp for your Radical rear silencer
Almost gone
€19.99
*
Replacement mounting plate with 2 screws. Used for mounting GP-Pro exhaust systems on Yamaha YZF-R 125 and MT 125 from Bj. 2021. But can also be used as a bracket for tinkering with all sorts of other uses. Technical data Dimensions:...
Available
€2.49
*
10 meters long and 50mm wide exhaust heat protection tape, available in different colors.
Available
From €24.95
*
DB-Killer lost? No problem! We have for many systems different replacement killer there. This one is a standard dB-killer in hexagonal shape, as a spare part for Pro and GP Pro exhaust systems.
Out of Stock
€54.90
*
Spare part for Arrow exhaust systems.
Available
€9.99
*
Die Racing Version des dB-Killer für deine Arrow Thunder Auspuffanlage. Der dB-Killer unterscheidet sich in der Länge vom standard dB-Killer, wodurch ein geringerer Staudruck entsteht. Durch diese Anpassung der Form verändert sich der...
Available
€49.95
*
Hierbei handelt es sich um einen Standard Ersatz dB-Killer für Arrow Thunder Auspuffe. Solltet ihr euren "verloren" haben, müsst ihn aber für den TÜV installieren und nachweisen, ist dieser der dB-Killer eurer Wahl. Maße: Länge: 200mm...
Available
€49.90
*
Simple exhaust spring, to hang the exhaust system on the cylinder, or to connect the muffler & manifold. Can also be used for other tinkering. The spring has ring eyelets at both ends. A little trickier to fit, but the hold is better!...
Available
€2.59
*
Exhaust systems become louder with increasing age. One reason for this is that impurities from the engine, such as combustion residues, are deposited in them. In the same way it can also happen that insulation wool comes off the exhaust...
Available
€6.99
*
Exhaust plugs are used during transport and mothballing of motorcycles to prevent rainwater from entering the exhaust system. This exhaust plug from Radical comes with a Remove before Ride Keylace.
Available
€6.99
*
Universal 125cc 4-stroke rear silencer from Motoflow. The inexpensive slip-on silencer can be mounted on virtually any 125cc & Bigbike vehicle. The muffler has a conical adapter flange, which can be cut to size according to the thickness...
Available
€99.90
*
;
€79.90
*
First of all heat protection tape is used to protect against burns. But especially with 2-stroke exhaust systems it even has a performance-enhancing effect. Because 2-stroke exhaust systems are very sensitive to temperature fluctuations....
Available
€14.99
*
;
€10.00
*
Some GPR exhausts have the special feature that they have an additional dB killer fitted. This dB killer is fitted BEFORE the rear silencer. It has a diameter of 54mm and is suitable for various models such as Deeptone, Furore, etc...
Available
€59.95
*
This is an aftermarket catalytic converter for MIVV exhaust systems. This fits in systems for all common Euro3 bikes. Dimensions: 100x50(52) mm
Out of Stock
€119.90
*
Cover cap for the mounting screw of the dB-Killer of SBK and LV-One exhaust systems.
Available
€9.99
*
The Polisport Silencer Protector provides excellent protection for your muffler from bumps and drops and looks great doing it: Made from a blend of silicone and metal Easy to install without the need for mounting hardware The thick...
Available
€40.95
*
;
From €29.95
*
The Polisport Silencer Protector provides excellent protection for your muffler from bumps and drops and looks great doing it: Made from a blend of silicone and metal Easy to install without the need for mounting hardware The thick...
Almost gone
€39.95
*
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Available
€9.99
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Replacement dB-Killer for different Arrow Thunder exhaust silencers. Please compare dimensions! Technical data length: 200mm diameter 1: 45mm diameter 2: 26mm Number of holes: 6 A single dB killer is delivered.
Available
€59.95
*
Available
€7.49
*
Heat protection film, multiple sizes
Self-adhesive heat protection films in various sizes and thicknesses. The film consists of a heat-resistant fibreglass fabric in combination with a thin, reflective aluminium foil and is indispensable for all plastic trim parts near the...
Available
From €5.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Viewed