Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

KTM EXC-125 Screws, nuts & small parts

1. Choose model
EXC 125 (1998 bis 2016)
Close filters
3 From 5
No results were found for the filter!
Screw Screw, M5x16, Inbus DIN912, universal
5mm DIN socket head screw. Can be used for every imaginable purpose. Scope of delivery: 1 pc. Technical data Head: Cylindrical Propulsion: Hexagon socket (Inbus) Length: 16mm Thread: M5 Standard: DIN912

Out of Stock

€1.29 *
Screw / Sprocket bolt Screw / Sprocket bolt, M6x20 (DIN933), universal
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Scope of supply: 1 pc.

Available

€1.99 *
Cladding screw Cladding screw, M6x10, Torx T-30, universal, 5 stck.
Simple, very short fairing screw with flat head and Torx hexagon socket. Can of course be used on all vehicles. Scope of delivery: 5 pcs. Technical data length: 10mm Thread: M6 Width across flats: T-30

Available

€6.99 *
Cladding screw Cladding screw, Universal, M5
Screw with collar and hexagon socket, for fairing parts, suitable for various vehicles. Thread: M5 length: 9 mm

Available

€1.99 *
Pack of 5 screws Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm

Available

€9.99 *
Screw Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm

Available

€5.49 *
Fairing / cockpit screw set Fairing / cockpit screw set, M5, screws, washers & rubber nut, (10 pieces each)
5mm fairing screws, or cockpit windscreen screw set. The set contains 10 screws, the matching washers and 10 rubber nuts. suitable for hole diameters 10mm to 11mm

Available

€15.99 *
Nut Nut, M6, V2A
V2A- stainless steel nut (rustproof). Universally usable. Thread: M6 Width across flats: 10

Available

€0.79 *
axle nut axle nut, M11x1.0
11mm nut. is used e.g. as axle fastening. Can of course also be used for other purposes... Dimensions: M11x1,0 mm

Available

€1.99 *
Schraube, Kettenrad / Bremsscheibe Schraube, Kettenrad / Bremsscheibe, M8 x 18 mm, Flachkopf / Innensechskant (TX), abgesetzt
Diese Schrauben werden idr. als Bremsscheiben-, oder Kettenradschrauben verwendet. Inkl. trockener Schraubensicherung (blau - mittelfest). Gewinde: M8 Kopf: Flach / TX Länge: 18 mm

Available

€2.49 *
10 pack fairing screws 10 pack fairing screws, Universal, M5
Pack of 10 hexagon socket head fairing screws, suitable for the fairings of various vehicles. Thread: M5 length: 9 mm

Available

€16.99 *
Pack of 10 nuts Pack of 10 nuts, M6, with collar and ratchet
Ten pcs. Universal nuts for almost every imaginable application. Thread: M6 With collar & ratchet teeth

Available

€10.99 *
Nut assortment Nut assortment, M6,8,10, with collar
Various collar nuts in practical, reusable sorting box.

Almost gone

€29.95 *
Clutch cable adjusting screw Clutch cable adjusting screw, M6, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M6 Inner diameter: 8,5 mm

Available

€3.49 *
Clutch cable adjusting screw Domino Clutch cable adjusting screw Domino, M7, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M7 Inner diameter: 8,5 mm

Available

€5.49 *
Collar nut Collar nut, M10 x 1.25 mm, with fuse, universal
Universal nut. Used on some vehicles, for example as a sprocket nut.

Available

€2.99 *
Chain wheel bolt Chain wheel bolt, universal, M8x1,25x40mm
Stud bolt for universal use. Used on some vehicles, e.g. for fastening the chain wheel. (Yamaha MT 125 & YZF-R 125)

Available

€3.99 *
Drain plug Oil/ dummy plug Coolant temperature Drain plug Oil/ dummy plug Coolant temperature, M14x1.5
M14 screw with 1.5 thread pitch. Can be used e.g. as drain plug for engine oil.

Available

€2.79 *
Stud bolt universal, e.g. exhaust manifold Stud bolt universal, e.g. exhaust manifold, M6x30
Thread dimension M6x30. Scope of delivery: 1 pc.

Available

€1.59 *
Outlet screw set Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.

Available

€3.59 *
Screw Screw, M4, hexagon socket
Is used by some manufacturers, for example, to secure the sprocket. But it can also be used to secure other things like any other screw.

Available

€1.99 *
Collar nut M8x1,25 Collar nut M8x1,25, Universal
Universal standard nut, can be used for anything. It is used for example as a sprocket nut on some vehicles. OEM part number for comparison purposes 92015-1022

Available

€1.59 *
Lock washer Lock washer, M8 x 15, universal
Universal spring washer for M8 screws.

Available

€0.99 *
Clamp Piaggio OEM
Clamp Piaggio OEM, Universal, D= 18mm
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072

Available

€4.99 *
3 From 5
Viewed