Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Malaguti RST 125 Brakes & Suspension

1. Choose model
RST 125 (ab 2019)
Close filters
3 From 4
No results were found for the filter!
Spring clutch lever Domino Spring clutch lever Domino, universal
The return spring on the clutch lever guarantees that it always springs back to its original position. If the spring is worn out, it must be replaced as quickly as possible. We offer an inexpensive alternative for this. In plug & play...

Available

€2.49 *
Screw / Sprocket bolt Screw / Sprocket bolt, M6x20 (DIN933), universal, 6 stck.
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.

Available

€10.99 *
Pack of 5 screws Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm

Available

€9.99 *
Screw Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm

Available

€5.49 *
Schraube, Kettenrad / Bremsscheibe Schraube, Kettenrad / Bremsscheibe, M8 x 18 mm, Flachkopf / Innensechskant (TX), abgesetzt
Diese Schrauben werden idr. als Bremsscheiben-, oder Kettenradschrauben verwendet. Inkl. trockener Schraubensicherung (blau - mittelfest). Gewinde: M8 Kopf: Flach / TX Länge: 18 mm

Available

€2.49 *
Fork seal rings Athena
Fork seal rings Athena, Aprilia RS4 125 from year 06-18, 40 x 52 x 10mm
Spongy riding behaviour or obvious oil loss at the fork are signs that it is time for a fork service. Athena sealing rings are of higher quality than OEM seals, or are even used as OEM seals by fork manufacturers. Athena sealing rings...

Available

€10.99 *
Brake pads set EBC
Brake pads set EBC, Aprilia RS/RS4 125, Derbi GPR 125, AJP brake system
EBC Standard brake pads contain aramid fibres, which are 6 times stronger than steel and of course completely asbestos-free. In general, only low-emission components are used in production. These standard materials surpass all previous...

Almost gone

€34.95 *
Accelerator cable Aprilia OEM
Accelerator cable Aprilia OEM, Aprilia RS / RS4 125 from year of manufacture 11 (Type: TW; KC)
Throttle cables, clutch cables and the chain of your motorcycle should be subject to regular maintenance. For this purpose special Teflon sprays are used, which penetrate deep into the inside of the Bowden cable. If the cable is not...

Almost gone

€18.99 *
Clutch cable adjusting screw Clutch cable adjusting screw, M6, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M6 Inner diameter: 8,5 mm

Available

€3.49 *
Clutch cable adjusting screw Domino Clutch cable adjusting screw Domino, M7, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M7 Inner diameter: 8,5 mm

Available

€5.49 *
Brake disc EBC
Brake disc EBC, Aprilia RS/RS4 50/125 from year 06, Derbi GPR 50/125, rear
Brake discs from EBC, Made In UK. The aim of the development is to improve the braking behaviour compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel...

Almost gone

€67.95 *
Brake pads set EBC Standard
Brake pads set EBC Standard, Kawasaki Ninja / Z 125, rear
These EBC brake pads are provided with aramid fibres, which are 6 times stronger than steel, and of course they are completely asbestos-free. In the production of EBC generally only low-emission components are used. These materials also...

Available

€29.90 *
throttle cable adjusting screw throttle cable adjusting screw, M6, Universal
Almost universally applicable adjusting screw for throttle cables. Thread: M6 Inner diameter: 6 mm

Available

€2.99 *
Rear brake disc Piaggio OEM
Rear brake disc Piaggio OEM, Aprilia RS/RS4125
Original brake disc (rear wheel) from Piaggio, suitable for various vehicle models of the Piaggio Group. D= 218mm OEM part number for comparison purposes 866115

Available

€21.99 *
Brake disc (front) Piaggio OEM
Brake disc (front) Piaggio OEM, Aprilia RS/RS4 125 year 11-, Derbi GPR 125 year 04-06
Piaggio original spare part, diameter: 300mm OEM part number for comparison purposes 866090, 00H01215021

Available

€59.95 *
Brake pedal Piaggio OEM
Brake pedal Piaggio OEM, Aprilia RS 125, year 99-06, RS4 125 from year 11
Original spare part for Aprilia vehicles from Piaggio. OEM part number for comparison purposes AP8235012

Available

€39.95 *
Brake pads set Piaggio OEM, rear
Brake pads set Piaggio OEM, rear, Aprilia RS4 125 Bj. 11-17
Piaggio original spare part. OEM part number for comparison purposes B044223, 867242, B044224

Available

€44.90 *
Footrest Piaggio Driver Links OEM
Footrest Piaggio Driver Links OEM, Aprilia RS/RS4 50/125 from 11, Derbi GPR 125 from 09
Left driver footrest for Aprilia and Derbi models. OEM part number for comparison purposes AP8132958 According to manufacturer suitable for 2011 RS4 125 4T 2012 RS4 125 4T 2013 RS4 125 4T 2014 RS4 125 4T 2015 RS4 125 4T 2016 RS4 125 4T...

Available

€79.95 *
Footrest Piaggio driver's right OEM
Footrest Piaggio driver's right OEM, Aprilia RS/RS4 125 from 11, Derbi GPR 125 from 09
Right driver footrest for Aprilia and Derbi models. OEM part number for comparison purposes AP8132957 According to manufacturer suitable for 2011 RS4 125 4T 2012 RS4 125 4T 2013 RS4 125 4T 2014 RS4 125 4T 2015 RS4 125 4T 2016 RS4 125 4T...

Available

€89.95 *
Banjo bolt brake hose AJP
Banjo bolt brake hose AJP, fine thread, 0,75 x 10mm
Since the original screw can no longer be used with AJP brake calipers, we offer you here a suitable screw to order. Please take the thread dimension from the article description of the caliper.

Available

€3.59 *
Banjo bolt brake hose AJP
Banjo bolt brake hose AJP, rough, 1,25 x 10mm
Since the original screw can no longer be used with AJP brake calipers, we offer you here a suitable screw to order. Please take the thread dimension from the article description of the brake caliper.

Available

€3.99 *
Brake disc NG
Brake disc NG, Aprilia RS4 / RS 125 from year 11 up (Type: TW, KC), Derbi GPR 125 from year 05 up (2- and 4-stroke)
Technical data Outer diameter: 300 mm Inner diameter: 90 mm bolt circle: 104 mm Number of mounting holes: 6 Mounting hole: 6.6 mm Reduction: none thickness: 4 mm Notes Due to the large number of differently used rims, it is not always...

Available

€34.95 *
Brake fluid reservoir Brake fluid reservoir, Universal, CNC milled
CNC milled brake fluid reservoir incl. handlebar mount. Available in different colours.

Almost gone

€18.90 *
Brake & Clutch Fittings Set MTKT CNC
Brake & Clutch Fittings Set MTKT CNC, diverse colors
MTKT offers a complete set, consisting of brake lever armature and clutch lever armature. A master brake cylinder for hydraulic brakes is also included. The individual parts of the set are mostly CNC milled and have an extremely...

Almost gone

€199.00 *
3 From 4

With the right parts on your brakes, chassis, frame and suspension from your Malaguti RST 125, you provide for the optimal driving experience and maximum safety.

"Who brakes later drives faster", you know. But then you should also have good brakes! Don't save at the wrong end and make sure that you regularly check the brake pads and discs on your RST 125. Brake discs on your RST 125 checks.

With the right levers and cables, you ensure a pleasant response when braking and clutching. clutch. This should not be underestimated, once you have sat in the saddle for half a day and pulled a few Hundred times on the lever has pulled, it can already be exhausting.

.

With the right fork and the optimal Stoßdämpfern on your Malaguti RST 125, you provide für your perfect comfort. Or not, if you want to have more of a sporty seat and driving feel.

Viewed