Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Engine parts

Close filters
20 From 22
No results were found for the filter!
Clutch facings Newfren Standard
Clutch facings Newfren Standard, Rotax 122
Newfren offers a wide range of brake spare parts as well as clutch pads in different qualities. The cork pads offered here are well comparable with the original pad plates. But according to Newfren they should last a bit longer than the...

Almost gone

€64.95 *
Clutch facings Newfren Racing
Clutch facings Newfren Racing, Rotax 122
In addition to the standard cork clutch facings, Newfren can also offer you a reinforced carbon kit. The special carbon mixture makes the clutch plates much more grippy! This makes it impossible for the clutch to slip even with heavily...

Available

€84.95 *
Inlet manifold / reed block kit Italkit
Inlet manifold / reed block kit Italkit, V-Force, Rotax 122/123, 32mm - 34mm carburetor
The V-Force reed valve block from Italkit has a maximum cross-section on the smallest valves. This allows the diaphragms to open and close with less inherent gas force, resulting in higher efficiency and improved motor performance....

Available

€109.90 *
Benzinhahn
Benzinhahn, Rieju Marathon (MRT) 125
Replacement petrol tap for Rieju motorcycles (MRT). Technical data Diameter: 15mm Cock positions : Left side : To Top : Open Right : Reserve Incl. fuel filter. OEM number for comparison : 0/000.370.0500

Available

€11.99 *
Benzinhahn Original Replica
Benzinhahn Original Replica, Vacuum, universal
Here we offer a vacuum fuel tap for all motorcycle models with carburetor. The fuel tap is simply pushed into the tank instead of the old one and can also be used to convert from manual operation to automatic operation. We recommend to...

Available

€8.99 *
Manual choke cable
Manual choke cable, universal, anodized handle
Here we offer a simple choke, with an actuator, which can be installed in the fairing of the vehicle as desired. The lever is delivered with a cable pull, can only be used in vehicles with carburetor.

Available

€12.99 *
Clamp
Clamp, universal, for example f. petrol, water or oil hoses, 6mm
6mm clamp for fuel hoses. Delivered is 1 piece.

Available

€1.99 *
Sealing sheet
Sealing sheet, various versions
As some cylinders are only supplied with one gasket, the adjustment of timing and pinch point is often not easy to achieve. In such a case the real moped tuner always has a sheet of gasket material at hand, from which he can cut an...

Available

€2.49 *
Hose clamp
Hose clamp, large, d=32mm, stainless
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.

Available

€1.29 *
Cooling water hose transparent
Cooling water hose transparent, with steel spiral, d=19x26mm, 1 meter
Cooling hoses with internal spiral for reinforcement. In contrast to the conventional black hoses, you can use the transparent cooling hoses to determine exactly whether there is still air in the cooling circuit to exclude possible...

Available

€14.99 * ; From €9.99 *
Fuel Hose
Fuel Hose, 1 meter, d=5mm, different colours
Fuel hose with one meter length and 5mm inner diameter. In many different colours. In addition to its actual use as a petrol hose, it can also be used as a hose for many other purposes. Available in many different colours. The hose can...

Available

€2.99 *
Kupferdichtring Kupferdichtring, Kupfer, 14x18x1,5, f. Thermoschalter / Universal
Universell einsetzbarer Kupferdichtring mit den Maßen 14x18x1,5. Wird idr. bei Piaggio/Derbi/Aprilia Motoren als Dichtung für den Thermoschalter verwendet. Kann aber für jegliche andere Möglichkeit Anwendung finden.

Available

€2.79 *
Radiator Aprilia TNT
Radiator Aprilia TNT, Radiator Aprilia RS50
This TNT replacement radiator is an inexpensive alternative to the original radiator that delivers good quality at a fair price. OEM part number for comparison purposes: 093600N

Available

€109.90 *
Clutch hub lock washer Piaggio OEM
Clutch hub lock washer Piaggio OEM, Aprilia(Piaggio) M545 / Rotax 122/123 Motoren
This article is an original product of the Piaggio brand OEM number for comparison purposes : 876418

Out of Stock

€3.99 *
Gasket cylinder head Honda OEM
Gasket cylinder head Honda OEM, Honda CB125R from year 21
This item is an original Honda brand gasket. Cylinder gaskets often need to be replaced to ensure optimum engine function and are therefore an unavoidable part of your motorcycle maintenance. OEM part number for comparison purposes...

Out of Stock

€24.95 *
Mounting bracket Schmitt Mounting bracket Schmitt, universell
Universal with rubber buffer, e.g. for radiators, tanks, custom panels etc...

Almost gone

€9.99 *
Cylinder gasket set Athena
Cylinder gasket set Athena, Yamaha DT bis Bj. 95
Athena, with more than four decades of experience in the industry, offers the most comprehensive range of replacement engine gaskets on the market. Athena's replacement gasket sets are the result of Italian craftsmanship and boast...

Almost gone

€21.95 *
Quickshifter UMA
Quickshifter UMA, Universell
Improve your motorcycle experience with the Uma Racing quick shift lever. This innovative accessory allows you to shift gears without the need for the clutch, while protecting your motorcycle transmission. Installation is as easy as can...

Almost gone

€259.90 *
Float chamber drain plug Float chamber drain plug, PWK Carburetor, Orange
Simple styling part for flat slide and type PWK carburetor. The screw is made of anodized aluminum. Delivery Incl. gasket

Almost gone

€6.00 *
Kupplungsdeckel RCB
Kupplungsdeckel RCB, Yamaha/ Minarelli YI-5 125cc Motor (Euro5), Rot
Das RCB Kupplungsgehäuse ist im Gegensatz zum herkömmlichen Deckel mit einem Sichtfenster ausgestattet, wodurch man einerseits die Qualität des Öles prüfen kann und man andererseits auch ein cooles optisches Plus erhält und die...

Out of Stock

€149.90 *
Gasket clutch cover Honda OEM
Gasket clutch cover Honda OEM, Honda CB125R from year 21
This item is an original spare part of the Honda brand. OEM part number for comparison 11394K56V50

Available

€15.99 *
Gasket ignition cover Honda OEM
Gasket ignition cover Honda OEM, Honda CB125R from year 21
This item is an original spare part of the Honda brand. OEM part number for comparison 11395K56V50

Almost gone

€10.95 *
Shaft circlip Yamaha OEM
Shaft circlip Yamaha OEM, universell
This item is an original spare part (OEM) of the brand Yamaha/Minarelli. The clip is used in various places for various bikes. An example on Yamaha motorcycles is the water pump. OEM part number for comparison purposes 990091040000,...

Available

€1.99 *
Needle roller bearing / Gearbox bearing / Shift drum bearing / Shaft bearing Needle roller bearing / Gearbox bearing / Shift drum bearing / Shaft bearing, universal, 10x10x14
This article is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...

Available

€2.99 *
20 From 22

Du bist der stolze Besitzer eines 125er Motorrads und möchtest dein Bike auf Vordermann bringen? Dann bist du bei uns genau richtig! Als Experten für Motor-Ersatz- und Tuningteile bieten wir alles, was du für eine Optimierung deines Bikes brauchst.

Von neuen Zylinderkits und Kurbelwellen über hochwertige Auspuffanlagen, diverse Filter und Dichtungen bis hin zu Abdeckungen und Schrauben – bei uns findest du alles, was dein 125er Motorrad zu einem echten Unikat macht. Und das Beste daran: Unsere Produkte sind nicht nur von bester Qualität, sondern auch noch zu erschwinglichen Preisen zu bekommen.

Egal, ob du ein erfahrener Tuner bist oder gerade erst damit beginnst, dein Bike aufzumotzen: Mit unserem breiten Angebot an Motor-Ersatz- und Tuningteilen bist du für jede Situation gerüstet. Also worauf wartest du noch? Schau jetzt bei uns vorbei und mache dein 125er Motorrad zu deinem ganz persönlichen Traumbike!

Viewed