1. Choose model
Marathon Pro LC 125 (2009 bis 2017, MRT)
2. Filter by category
No results were found for the filter!
The swing arm bearing is exposed to high forces due to constant movement and can wear out quickly. The result is play in the swing arm, which can contribute to poorer handling and is a not inconsiderable safety factor. Scope of delivery...
Available
€13.99
*
Screw side stand, Rieju Marathon (MRT) 125
Screw for side stand mounting. measurements: Thread: M10x1,25 Length: 52mm
Available
€7.79
*
Replacement spring to preload the driver footrest. It is needed to ensure the footrest folds out automatically. OEM part number for comparison purposes 0/000.470.5001
Available
€4.49
*
Bolt and dust protection rubber as spare part for the brake pump of many Aprilia, Derbi, Rieju bikes.
Available
€11.99
*
Replacement chain tensioning plate for various Rieju models. OEM part number for comparison purposes 0/000.380.5100
Available
€11.99
*
Left spare footrest for the driver. Suitable for various Rieju models. Without mounting parts! OEM part number for comparison purposes 0/000.740.0310
Available
€25.95
*
Spare brake pedal, foot brake lever for Rieju Marathon (MRT) 125 . OEM part number for comparison purposes 0/000.730.0731
Available
€44.95
*
Rear brake fluid reservoir. Incl. hose. Rieju original spare part. OEM part number for comparison purposes 0/000.030.0170
Out of Stock
€30.95
*
Screw / Sprocket bolt, M6x20 (DIN933), universal, 6 stck.
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.
Available
€10.99
*
Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€9.99
*
Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm
Available
€5.49
*
Schraube, Kettenrad / Bremsscheibe, M8 x 18 mm, Flachkopf / Innensechskant (TX), abgesetzt
Diese Schrauben werden idr. als Bremsscheiben-, oder Kettenradschrauben verwendet. Inkl. trockener Schraubensicherung (blau - mittelfest). Gewinde: M8 Kopf: Flach / TX Länge: 18 mm
Available
€2.49
*
Clutch cable adjusting screw, M6, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M6 Inner diameter: 8,5 mm
Available
€3.49
*
Clutch cable adjusting screw Domino, M7, Universal
Almost universally applicable adjusting screw for clutch cables. Thread: M7 Inner diameter: 8,5 mm
Available
€5.49
*
These EBC brake pads are provided with aramid fibres, which are 6 times stronger than steel, and of course they are completely asbestos-free. In the production of EBC generally only low-emission components are used. These materials also...
Available
€29.90
*
throttle cable adjusting screw, M6, Universal
Almost universally applicable adjusting screw for throttle cables. Thread: M6 Inner diameter: 6 mm
Available
€2.99
*
Since the original screw can no longer be used with AJP brake calipers, we offer you here a suitable screw to order. Please take the thread dimension from the article description of the caliper.
Available
€3.59
*
Since the original screw can no longer be used with AJP brake calipers, we offer you here a suitable screw to order. Please take the thread dimension from the article description of the brake caliper.
Available
€3.99
*
Brake fluid reservoir, Universal, CNC milled
CNC milled brake fluid reservoir incl. handlebar mount. Available in different colours.
Almost gone
€18.90
*
MTKT offers a complete set, consisting of brake lever armature and clutch lever armature. A master brake cylinder for hydraulic brakes is also included. The individual parts of the set are mostly CNC milled and have an extremely...
Almost gone
€199.00
*
Copper paste is used for the highest temperatures in screw connections and interfaces, e.g. exhaust screws, spark plug threads and brakes, to prevent corrosion and ensure subsequent disassembly. Operating temperature range: - 40 °C to +...
Available
€8.99
*
Protects the fork from stone chips, dirt and moisture. Available in 3 colours. Technical data length: 350mm width top: 32mm width bottom: 58mm 28 shafts
Almost gone
€16.99
*
Cable clip for the safe laying of brake hoses, cables, speedo cables or various trains. The mounting hole has a diameter of 6mm, so it can be mounted under nearly every screw up to 6mm.
Available
€5.49
*
Anti- Squeak foil, f. Brake pads
Anti-squeak foil / noise damping foil for brake pads. The foil is glued to the back plate of the brake pads and thus ensures less vibration, protects the brake pistons and reduces squeaking noises during braking. Scope of delivery: 4...
Available
€9.99
*
With the right parts on your brakes, chassis, frame and suspension from your Rieju Marathon 125, you provide for the optimal driving experience and maximum safety.
"Who brakes later drives faster", you know. But then you should also have good brakes! Don't save at the wrong end and make sure that you regularly check the brake pads and discs on your Marathon 125. Brake discs on your Marathon 125 checks.
With the right levers and cables, you ensure a pleasant response when braking and clutching. clutch. This should not be underestimated, once you have sat in the saddle for half a day and pulled a few Hundred times on the lever has pulled, it can already be exhausting.
.
With the right fork and the optimal Stoßdämpfern on your Rieju Marathon 125, you provide für your perfect comfort. Or not, if you want to have more of a sporty seat and driving feel.
Viewed