1. Choose model
Marathon Pro LC 125 (2009 bis 2017, MRT)
2. Filter by category
No results were found for the filter!
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm
Almost gone
€27.95
*
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072
Available
€4.99
*
Available
€1.99
*
Available
€1.49
*
Original replacement chain tensioner from Yamaha. Fits Yamaha YZF-R125. OEM part number for comparison purposes 5LWE22100000
Available
€89.95
*
If the timing chain tensioner is replaced, it may be necessary to renew its seal as well. Here we offer this spare part original from Yamaha. OEM part number for comparison purposes 1DYE22130000
Available
€4.24
*
The timing chain rails perform an important task in the engine, as they protect the chain from contact with the housing and thus prevent increased wear. Unfortunately, however, these components themselves are subject to high stress. If...
Available
€9.99
*
The timing chain of modern 4-stroke engines is, compared to a timing belt, actually maintenance-free. However, at high mileage or other maintenance work, it may be useful to replace the chain. We offer here an original timing chain for...
Available
€27.95
*
The timing chain rails perform an important task in the engine, as they protect the chain from contact with the housing and thus prevent increased wear. Unfortunately, however, these components themselves are subject to high stress. If...
Available
€11.90
*
Small component with great effect. The valve stem seal influences for example the oil consumption. Hard "stems" let oil run down the valve, which is then burned. Whenever work is carried out on the dismantled cylinder head, it is...
Available
€3.99
*
Reinforced clutch springs from EBC, 10% harder than the original springs. Shank remedy for slipping clutches by increasing performance.
Available
€15.50
*
Features Increased compression force of 10 to 15% compared to standard springs Reduction of clutch slippage Made of heat-treated carbon steel
Available
€13.99
*
Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm
Available
€2.99
*
Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...
Almost gone
€8.49
*
Spring clip for fuel line
Spring clip for a tight fit of the fuel hose on the fuel tap and carburetor connection. 8,8 - 9,5mm
Available
€2.99
*
If you don't want to change the thermometer in the cylinder head, or the thread doesn't fit, we can offer you this nice anodized adapter which is simply put between the cooling hose. Fits in combination with Stage6 Multimeter & Koso PRO...
Available
€28.95
*
Viewed