1. Choose model
RS3 125 (2011 bis 2016)
2. Filter by category
No results were found for the filter!
NEW
Light mask ✅ Start number plate ✅ The special feature of this mask is obvious. 3 LEDs can be connected as front lights. So you simply have 2 in 1! Anyone who has ever been to an event like the Mopedmeeting knows what the number plates...
Almost gone
€49.95
*
With the mini rear light from Motoflow, your bike gets an optical upgrade, which compensates for the original, often large and poor-looking rear lights. The rear light is bright enough and even has an integrated license plate light. It...
Available
€19.99
*
The Motoflow rear light to replace your original light. The rear light is equipped with LEDs and is therefore very bright without consuming a lot of energy. The rear light is suitable for every machine, whether chopper, cross or sport.
Available
€29.95
*
A Motorflow rear light for sporty machines. The rear light is very sporty and pointed , with a different technology than most rear lights. Instead of individual recognizable rear lights, the rear light shines in a homogeneous light...
Available
€19.95
*
These are LED running light turn signals in drop shape from Motoflow. The connection is a standard M8 thread. In the scope of delivery are 2 turn signals.
Available
€21.95
*
These are LED running light turn signals in rod form from Motoflow. The connection is a standard M8 thread. In the scope of delivery are 2 turn signals.
Available
€21.99
*
These are LED running light turn signals in rod form from Motoflow. The connection is a standard M8 thread. In the scope of delivery are 2 turn signals.
Available
€21.99
*
This is a stripe design LED light that can be attached to any bike. Ideally suited for setup setups that are not designed to be street legal, as this light does not have an on/off function. However, it will also work as an additional...
Available
€24.95
*
If your bike already has LED strips like these HERE , there is now the perfect match for your helmet! Of course you can use the strips anywhere else.
Available
€29.99
*
Many vehicles now have the flasher relay integrated in their CDI, which unfortunately makes it difficult and costly to install LED turn signals, as these would flash with increased frequency due to the reduced power consumption. By using...
Available
€31.60
*
;
€27.95
*
Turn signal set with sequential LED running light function, which can now be seen on almost every new car. From now on you can also provide your bike with this bold trend. The turn signals are, as necessary for the function, slightly...
Available
€39.99
*
;
€23.99
*
Simple LED turn signals in the shape of an arrow. Here we offer a practical turn signal set consisting of 2 pairs, so 4 individual turn signals, as well as 4 resistors. So the complete moped can be converted without any problems....
Available
€61.95
*
This is a simple and approved LED license plate light, which can basically be attached to any bike and any license plate holder. The 2 screws can be drilled in case of need even through the license plate itself ;)
Available
€12.99
*
Especially with running light flashers, there can be massive problems with accessory relays, if these are not dafürt suitable, they lead to malfunctions or do not let the flashing light run cleanly. This flasher relay eliminates the...
Available
€8.99
*
H6 halogen bulb for headlights suitable for two-wheelers or quad / ATV with PX15D base. The bulb is operated with 12V and has a power of 35/35W. Please compare beforehand the base of the required bulb with the product photo or the lamp...
Almost gone
€5.99
*
Legal, universal tail light from the house of Motoflow. However, with a little adjustment work, the tail light can be used on just about any motorcycle ;) . technical data Dimensions height : 40mm width : 140mm Hole spacing : 108mm Cable...
Available
€39.95
*
;
€34.95
*
Available
€7.99
*
Turn signal set with LED running light function. The indicators have a black housing and white glass. The special thing about these turn signals is a position light function. For this purpose the turn signals have a third connection...
Available
€21.99
*
Turn signal set with LED chaser function. The indicators have a black ABS plastic housing and white transparent glass with some diffusers. Fancy look, similar to a locking tip, with two spoiler-like wings. Make your moped a fighter on...
Available
€21.99
*
Turn signal set with LED running light function. The turn signals are provided with black housing and white glass. Scope of delivery a pair of indicators (2 pieces!) Notes These are LED turn signals! Please order resistors or a suitable...
Available
€21.99
*
These filigree but very eye-catching indicators with orange applications are suitable for anyone who has something individual planned with their bike. Especially the angular design in combination with the already mentioned colour...
Available
€19.99
*
The universal LED tail light is the ideal addition for all conversions after which the standard tail light can no longer be used. Equipped with a CE mark of conformity, the whole thing can also be driven legally in road traffic! It also...
Available
From €19.95
*
Popular rear light form now with license plate holder! The tail light is delivered as usual with E-mark. However, the indicator function has been omitted with this tail light.
Available
€35.90
*
Replacement bulb for various mopeds and retrofit light masks. Technical data Base shape: BA20D voltage: 12V Power: 35W/35W
Available
€2.79
*
The turn signals of your Rieju RS3 125 are broken or you want a new style? No problem. With us you will find replacement turn signals and tuning turn signals in a variety of styles.
Since turn signals are also about safety, these should have an E-Prüfzeichen. This means that the accessories turn signals in an EU country to their conformity in road traffic in an EU country and ensure sufficiently good visibility. Of course you can also install turn signals without an E-number, but we advise you not to do so. Because even the TÜV checks whether they are well visible and functional.
Viewed