1. Choose model
RS3 125 (2011 bis 2016)
2. Filter by category
No results were found for the filter!
Gearbox bearing / Needle roller bearing / Shift shaft bearing, universell, 12x16x10
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and connections. It can be used in different places of different bikes. OEM part number for comparison...
Available
€2.99
*
ProTaper clutch fitting made of cold forged aluminum. The clutch fitting comes with quick adjustment as well as a bearing forged aluminum lever. The nylon ring on the clamping surface can prevent the armature from breaking in the event...
Out of Stock
€56.95
*
Ball bearing camshaft 6906, 30x47x9mm, YI-3 motors
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and function. Ball bearing open 6906 - 30x47x9mm suitable for the camshaft for YI-3 OHC engines.
Available
€3.99
*
Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...
Available
€9.99
*
This item is an original spare part of the brand Yamaha/Minarelli This ball bearing is located in the cylinder head and guides the camshaft. Often this bearing can only be removed mechanically and is damaged. A new bearing should...
Available
€3.99
*
This item is an original spare part (OEM) of the brand Yamaha/Minarelli OEM part number for comparison 93306305XV00 Scope of delivery: 1 pc.
Available
€47.90
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€3.49
*
Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m
Available
€3.99
*
Available
€10.99
*
Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...
Available
€14.99
*
This item is an original spare part (OEM) of the brand Yamaha. OEM part number for comparison purposes 1CKE54510000, 3C1E54510000 Scope of delivery: 1 pc.
Available
€20.90
*
This item is an original spare part (OEM) of the brand Yamaha. OEM part number for comparison purposes 5D7E54610000 Scope of delivery: 1 pc.
Available
€19.90
*
Special screw for fixing the clutch basket. Supplied with the necessary washer to fix the clutch spring. Scope of delivery: 1stck. Yamaha OEM part number for comparison: 1S7E67770000
Available
€0.39
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Rocker arm set, Yamaha / Minarelli YI 4-Takt Motoren
The rocker arms operate the valves in the 4-stroke cylinder head. Since the part actuated by the camshaft is mounted is mounted on ball bearings it is mechanical exposed to mechanical wear. These rocker arms are the perfect & cheap...
Available
€39.90
*
Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
OEM clutch armature with choke lever and domino rubber grip.
Almost gone
€124.90
*
Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...
Available
€5.99
*
Yamaha original spare part.
Available
€4.95
*
10% harder clutch springs from TRW-Lucas. The increased pressure on the clutch plate prevents the clutch from slipping. Delivery as set consisting of 4 pcs.
Available
€14.90
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
Viewed