Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Sherco SE 125 2 Takt Brakes & Suspension

2. Filter by category
Filter
Close filters
28 From 30
No results were found for the filter!
Brake hose Brake hose, Rieju Marathon, L=1200mm, Front
Steel braided replacement brake hose for Rieju Marathon. Technical data Connections: Eye - Eye Angle: 1x 30°, 1x 70 Length: 120cm / 1,2m

Available

€30.95 *
Fork OEM
Fork OEM, Rieju Marathon (MRT) 125, including steering head bearing
The fork is of course one of the most important parts of the chassis. In an accident it can happen quickly that the handlebars or triple clamps bend and the handling of the moped is negatively affected. We can offer an original Rieju...

Available

€399.90 *
Pillion footrest holder
Pillion footrest holder, Rieju Marathon (MRT) 125, links
Footrests and their holders are parts that are often and gladly damaged in a fall. Bent or even broken footrests are uncomfortable and sometimes even dangerous when riding. They should therefore be replaced immediately. OEM part number...

Available

€24.95 *
Pillion footrest holder
Pillion footrest holder, Rieju Marathon (MRT) 125, rechts
Footrests and their holders are parts that are often and gladly damaged in a fall. Bent or even broken footrests are uncomfortable and sometimes even dangerous when riding. They should therefore be replaced immediately. OEM part number...

Available

€24.95 *
Brake disc OEM
Brake disc OEM, f. Rieju Marathon (MRT) 125, hinten
Original replacement brake disc for Rieju Marathon (MRT) 125 . Dimensions: 180x58x3.5mm. OEM part number for comparison purposes 0/001.090.0207

Available

€82.95 *
Pressure pin rear axle brake
Pressure pin rear axle brake, Rieju Marathon (MRT) 125
Pressure pin, which connects the brake pedal with the master brake cylinder. OEM part number for comparison purposes 0/000.240.5001

Available

€7.49 *
side stand side stand, Rieju Marathon (MRT) 125
Black side stand suitable for Rieju Marathon (MRT) 125.

Available

€24.90 *
side stand plate side stand plate, Rieju Marathon (MRT) 125
Adapter plate for mounting the side stand

Available

€3.59 *
Fork immersion tube Rieju OEM
Fork immersion tube Rieju OEM, Rieju Marathon (MRT) 125
In case of damage such as stone chips, it is essential to replace the immersion tube. This is because even the strongest oil scraper ring will lose oil at some point due to unevenness in the bare sealing surface. As a result, the damping...

Available

€104.95 *
Footrest tension spring Rieju OEM
Footrest tension spring Rieju OEM, Rieju Marathon (MRT) 125, Links
Replacement spring to preload the driver footrest. It is needed to ensure the footrest folds out automatically. OEM part number for comparison purposes 0/000.470.5002

Available

€4.49 *
Throttle grip Rieju OEM
Throttle grip Rieju OEM, Rieju Marathon (MRT) 125
Throttle grip incl. grip rubber and bracket. Original Rieju spare part. OEM part number for comparison 0/000.530.5007

Out of Stock

€34.95 *
Footrest Rieju OEM
Footrest Rieju OEM, Rieju Marathon (MRT) 125, right/left, pillion passenger
Single pillion footrest from Rieju. Can be mounted on the right or left side. OEM part number for comparison purposes 0/000.740.0330

Out of Stock

€23.95 *
Swing arm bush / swing arm bearing Rieju OEM
Swing arm bush / swing arm bearing Rieju OEM, Rieju Marathon (MRT) 125
The swing arm bearing is exposed to high forces due to constant movement and can wear out quickly. The result is play in the swing arm, which can contribute to poorer handling and is a not inconsiderable safety factor. Scope of delivery...

Available

€13.99 *
Screw side stand Screw side stand, Rieju Marathon (MRT) 125
Screw for side stand mounting. measurements: Thread: M10x1,25 Length: 52mm

Available

€7.79 *
Footrest tension spring Rieju OEM
Footrest tension spring Rieju OEM, Rieju Marathon (MRT) 125, Right
Replacement spring to preload the driver footrest. It is needed to ensure the footrest folds out automatically. OEM part number for comparison purposes 0/000.470.5001

Available

€4.49 *
Bolt and dust protection rubber Brake pump
Bolt and dust protection rubber Brake pump, Rieju Marathon (MRT) 125
Bolt and dust protection rubber as spare part for the brake pump of many Aprilia, Derbi, Rieju bikes.

Available

€11.99 *
Chain tensioner plate Rieju OEM
Chain tensioner plate Rieju OEM, Rieju Marathon (MRT) 125
Replacement chain tensioning plate for various Rieju models. OEM part number for comparison purposes 0/000.380.5100

Available

€11.99 *
Footrest Rieju OEM
Footrest Rieju OEM, Rieju Marathon (MRT) 125, left, driver
Left spare footrest for the driver. Suitable for various Rieju models. Without mounting parts! OEM part number for comparison purposes 0/000.740.0310

Available

€25.95 *
Brake pedal
Brake pedal, Rieju Marathon (MRT) 125
Spare brake pedal, foot brake lever for Rieju Marathon (MRT) 125 . OEM part number for comparison purposes 0/000.730.0731

Available

€44.95 *
Brake fluid reservoir Rieju OEM
Brake fluid reservoir Rieju OEM, Rieju Marathon (MRT)
Rear brake fluid reservoir. Incl. hose. Rieju original spare part. OEM part number for comparison purposes 0/000.030.0170

Out of Stock

€30.95 *
Screw / Sprocket bolt Screw / Sprocket bolt, M6x20 (DIN933), universal, 6 stck.
In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Here we offer a set of 6 screws. Scope of delivery: 6 pcs.

Available

€10.99 *
Pack of 5 screws Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm

Available

€9.99 *
Screw Screw, M6, with collar, pack of 4
Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm

Available

€5.49 *
Schraube, Kettenrad / Bremsscheibe Schraube, Kettenrad / Bremsscheibe, M8 x 18 mm, Flachkopf / Innensechskant (TX), abgesetzt
Diese Schrauben werden idr. als Bremsscheiben-, oder Kettenradschrauben verwendet. Inkl. trockener Schraubensicherung (blau - mittelfest). Gewinde: M8 Kopf: Flach / TX Länge: 18 mm

Available

€2.49 *
28 From 30

With the right parts on your brakes, chassis, frame and suspension from your Sherco SE 125 2 Takt, you provide for the optimal driving experience and maximum safety.

"Who brakes later drives faster", you know. But then you should also have good brakes! Don't save at the wrong end and make sure that you regularly check the brake pads and discs on your SE 125 2 Takt. Brake discs on your SE 125 2 Takt checks.

With the right levers and cables, you ensure a pleasant response when braking and clutching. clutch. This should not be underestimated, once you have sat in the saddle for half a day and pulled a few Hundred times on the lever has pulled, it can already be exhausting.

.

With the right fork and the optimal Stoßdämpfern on your Sherco SE 125 2 Takt, you provide für your perfect comfort. Or not, if you want to have more of a sporty seat and driving feel.

Viewed