2. Filter by category
No results were found for the filter!
Complete engine gasket set from Athena, suitable for KTM 125cc 200cc and 390cc 4-T engines. The gasket set includes cylinder base, head & valve cover gaskets as well as the gaskets for clutch & alternator covers and many other small...
Almost gone
€74.95
*
Valve stem seals are installed to prevent oil from the cylinder head from entering the combustion chamber via the valve guides. A blue smoking exhaust can be an indication for defective valve stem seals besides other damages. Suitable as...
Available
€5.95
*
;
€4.20
*
Paper seal to seal the timing chain housing. Should be replaced during all maintenance work on the timing chain tensioner. OEM part number for comparison purposes 430350; 834254; 862777; AP8550429; AP8575011; 847928
Available
€3.19
*
Cylinder kit from Airsal in standard 54mm bore for Yamaha YBR 125, this cylinder kit can be used if for example the original cylinder is damaged or worn out. So you have a cheap replacement for the expensive original spare part. The...
Available
€179.90
*
;
€125.90
*
TNT aluminium replacement cylinder kit for air-cooled Yamaha 125cc engines (mostly used before 2006, but some still used today). Especially when the original cylinder is worn out or loses performance due to age and high mileage, a...
Almost gone
€69.95
*
This cylinder kit for Yamaha YBR 125 increases the standard displacement from 125cc to a full 150cc. This allows you to get some more power and especially some torque from the standard YBR-125 engine. When using this cylinder, the...
Almost gone
€139.90
*
If the timing chain tensioner is replaced, it may be necessary to renew its seal as well. Here we offer this spare part original from Yamaha. OEM part number for comparison purposes 1DYE22130000
Available
€4.24
*
Compared to the 150cc cylinder kit from Naraku, the 177cc cylinder has of course been given an even larger bore which in turn can further optimise the performance of the engine. Since in cubic classes from 160cc on the original ECU...
Almost gone
€219.90
*
Complete kit of all necessary gaskets for the Yamaha DT 125cc engine used by 99-06 on the R/RE/X models.
Available
€44.95
*
Valve stem seals are an important part of the internal sealing of the engine. If the "stems" are leaking, oil penetrates via the valve guide into the inlet or exhaust channel. Scope of delivery: 1 pc.
Available
€5.99
*
Replacement gaskets for the Yamaha DT 125 R/RE and X cylinders.
Almost gone
€30.95
*
Replacement gaskets for the Piaggio 125cc 4-stroke engine, which was used for example in the Aprilia RS4 125.
Available
€79.95
*
Athena 125cc cylinder kit for Yamaha 125cc LC 2-stroke engines. The cylinder kit consists of an aluminium cylinder, a matching head and gaskets. For the exhaust control a suitable rotating cylinder is included. The cylinder is perfectly...
Available
€499.90
*
Athena 170cc cylinder kit for Yamaha 125cc LC 2-stroke engines. The cylinder kit consists of an aluminium cylinder, as well as a matching head and gaskets. For the exhaust control a suitable rotating cylinder is supplied. The carburetor...
Available
€589.95
*
Seal timing chain tensioner KTM, KTM Duke, RC 125/200/390, O-ring
Timing chain tensioner seal O-ring 10.15X1.5 mm Original spare part OEM part number for comparison purposes J770010015
Available
€2.19
*
Timing chain tensioner seal Flat gasket KTM- Original spare part OEM part number for comparison purposes 90136003003
Available
€3.50
*
Pneumatic exhaust system for the Aprilia RS 125 engine. Most people will have noticed on their 125cc Aprilia RS that when the engine is de-throttled the power is suddenly released at around 8000 rpm by opening the exhaust slide. As this...
Available
€155.90
*
From Italkit we can offer here a supplement to the 125cc original Rotax cylinder, as well as the 140cc tuning cylinder kit. The combustion chamber calotte clearly increases the compression of the cylinder and is optimized in its geometry...
Available
€89.95
*
From Italkit we can offer here a supplement to the 125cc original Rotax cylinder, as well as the 140cc tuning cylinder kit. The combustion chamber calotte clearly increases the compression of the cylinder and is optimized in its geometry...
Available
€89.95
*
Small component with great effect. The valve stem seal influences for example the oil consumption. Hard "stems" let oil run down the valve, which is then burned. Whenever work is carried out on the dismantled cylinder head, it is...
Available
€3.99
*
To get the absolute maximum power out of Yamaha's YI-3 engines, this 62mm Ø Naraku cylinder head is indispensable. More passage, reinforced valve springs and larger valves (21/23mm) let every cylinder with 62-64mm bore breathe properly....
Almost gone
€429.90
*
Valve stem seals, KTM Duke/RC 125, 4 pcs.
Valve stem seals are installed to prevent oil from the cylinder head from entering the combustion chamber via the valve guides. A blue smoking exhaust can be an indication for defective valve stem seals. Scope of delivery 4 pcs: 2x...
Almost gone
€15.99
*
This Athena tuning cylinder kit differs technically only slightly from the cylinder kit that was specially developed for the Yamah a WR 125. The most significant difference between this and the other Athena kit is the mapping of the ECU,...
Available
€439.95
*
In addition to the 125cc standard cylinder kit, Airsal also offers a T6 racing version. The main difference of the T6 compared to the 125cc standard cylinder is the improved piston, which significantly changes the combustion chamber...
Available
€145.95
*
The cylinder is the heart of your Sherco SE 125 2 Takt. This is where all the power at your disposal comes from. In modern engines are built to be very robust and durable. Nevertheless it can happen that a part of your cylinder breaks and you need a spare part. This is the case, for example, with the engine gasket from time to time. In this case, you should also carry out a repair on your SE 125 2 Takt, because a defective cylinder not only cylinder not only costs you performance on the road, but in the worst case it can also lead to a major more serious (and more expensive) damage to other areas of the engine.
In addition to replacement pistons, you can also find replicas of the original 125cc cylinders. So you can get the "factory condition" of your Sherco SE 125 2 Takt at any time.
Darüberhinaus we offer some tuning packs and tuning cylinders. Here there are different sizesößen between 125cc to 183cc displacement. So you increase the performance of your SE 125 2 Takt für the race track.
.
Viewed