1. Choose model
GSX-R 125 (2017 bis 2020, L8/9-DL33 (Euro4))
GSX-R 125 (ab 2021, M0/1-DL33 (Euro5))
2. Filter by category
No results were found for the filter!
ProTaper clutch fitting made of cold forged aluminum. The clutch fitting comes with quick adjustment as well as a bearing forged aluminum lever. The nylon ring on the clamping surface can prevent the armature from breaking in the event...
Out of Stock
€56.95
*
Cooling water hose, 1m x 9mm, transparent
These cooling hoses have an internal spiral for reinforcement. In contrast to the conventional black hoses, the transparent cooling hoses allow you to determine exactly whether there is still air in the cooling circuit, in order to...
Available
€9.99
*
Oil hose, 2,2x4mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,2mm Outer diameter: 4mm Length: 5m
Available
€3.49
*
Oil hose, 2,5x5mm, 5m long, green, universal
Here we offer you a transparent green oil hose. Dimensions: Inner diameter: 2,5mm Outer diameter: 5mm Length: 5m
Available
€3.99
*
Available
€10.99
*
Cooling water hose, with steel spiral,15mm, 1 meter, transparent
Transparent coolant hose with an inner diameter of 15mm. The length is 1m. Coolant hoses with an inner diameter of 15mm are usually used on mopeds with Minarelli engines. Practical side effect, you can see whether the cooling water is...
Available
€14.99
*
EBC delivers with these clutch springs 10% more hardness than the originals. Scope of delivery: 4 pieces
Almost gone
€16.50
*
;
€6.99
*
The EBC CK standard clutch plates correspond to the original plates in dimension and quantity. The lining material is cork-based with a high aluminum content to reduce wear and fading to a minimum. The high density material prevents pad...
Almost gone
€35.95
*
;
€22.95
*
You want to get everything out of your bike? Then you can not do without a reinforced clutch! This is a set of aramid fiber lined plates, steel discs and reinforced springs for the highest demands. Some sets include disc springs instead...
Almost gone
€91.95
*
Sealing rubber for the brake master cylinder, Suzuki original spare part! OEM part number for comparison purposes: Suzuki: 5966712K00
Almost gone
€4.99
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Clamps / hose clamps, 50 parts
Practical assortment box with different sizes of hose clamps. Should not be missing in any well-assorted workshop. Delivered are 10 clamps each in 6, 8, 10, 12 and 14mm diameter.
Available
€34.95
*
Hose clamp, universal, 8 x 300mm
Practical set for assembling hose clamps yourself. Consisting of 8 screw clips and a 30cm long steel band. The band can be torn off in the desired length, then only the clip is attached and the clamp is ready for use. Notes Cut the tape...
Available
€5.99
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Benzinhahn, universal, M16 x 1,5
Largely universal, vacuum-controlled petrol tap with screw connection. The scope of delivery also includes the pre-filter (tube), which sits in the petrol tap. Suitable for all petrol tanks with corresponding thread & vacuum connection....
Available
€10.99
*
Graphite sealing ring from Athena. Can be used in many different vehicles as a seal for overlapping plug connections.
Available
€13.95
*
Hose clamp assortment, 50 parts
Galvanized steel hose clamps with worm thread for attaching hoses to pipes and hose nozzles. Including 8mm socket wrench. Sizes: 12 x 13-19mm 12 x 16-22mm 10 x 18-27mm 7 x 20-32mm 5 x 22-38mm 3 x 24-44mm
Almost gone
€27.95
*
18mm hose clamp from Piaggio, can of course be used on all vehicles. OEM part number for comparison purposes 879888; 256074; 577557; AP8104072
Available
€4.99
*
Available
€1.99
*
Available
€1.49
*
Oil hose, universal
In the course of time the original hose can become porous, so that oil leaks out. This will not only make your engine dirty, but it will also lose lubrication, which can lead to the dreaded piston jam. 1m - universally applicable. 3 x 5mm
Available
€2.99
*
Petrol tap, universal
Manual fuel tap. Especially useful for converted carburettors or intake manifolds which are not equipped with a vacuum connection. Usually the vacuum taps are then drilled through. In order to prevent the unintentional leakage of petrol...
Almost gone
€8.49
*
Viewed