Screws, nuts & small parts for Suzuki SV 650

5mm DIN socket head screw. Can be used for every imaginable purpose. Scope of delivery: 1 pc. Technical data Head: Cylindrical Propulsion: Hexagon socket (Inbus) Length: 16mm Thread: M5 Standard: DIN912

Out of Stock

€1.29 *

Screw / Sprocket bolt, M6x20 (DIN933), universal

In the end it is a normal M6 8.8 DIN screw. Therefore it can be used almost universally. Scope of supply: 1 pc.

Available

€1.99 *

Cladding screw, M6x10, Torx T-30, universal, 5 stck.

Simple, very short fairing screw with flat head and Torx hexagon socket. Can of course be used on all vehicles. Scope of delivery: 5 pcs. Technical data length: 10mm Thread: M6 Width across flats: T-30

Available

€6.99 *

Cladding screw, Universal, M5

Screw with collar and hexagon socket, for fairing parts, suitable for various vehicles. Thread: M5 length: 9 mm

Available

€1.99 *

Pack of 5 screws, M6 x 20 mm, flat head / inside corner (Torx), stepped

Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm

Available

€9.99 *

Screw, M6, with collar, pack of 4

Collar screw with M6 thread and 16mm length is idr. used as brake disk screw. But it can also be used for everything else. Thread: M6 Head: 6 Kant length: 16 mm

Available

€5.49 *

Fairing / cockpit screw set, M5, screws, washers & rubber nut, (10 pieces each)

5mm fairing screws, or cockpit windscreen screw set. The set contains 10 screws, the matching washers and 10 rubber nuts. suitable for hole diameters 10mm to 11mm

Available

€15.99 *

Nut, M6, V2A

V2A- stainless steel nut (rustproof). Universally usable. Thread: M6 Width across flats: 10

Available

€0.79 *

axle nut, M11x1.0

11mm nut. is used e.g. as axle fastening. Can of course also be used for other purposes... Dimensions: M11x1,0 mm

Available

€1.99 *

Schraube, Kettenrad / Bremsscheibe, M8 x 18 mm, Flachkopf / Innensechskant (TX), abgesetzt

Diese Schrauben werden idr. als Bremsscheiben-, oder Kettenradschrauben verwendet. Inkl. trockener Schraubensicherung (blau - mittelfest). Gewinde: M8 Kopf: Flach / TX Länge: 18 mm

Available

€2.49 *

10 pack fairing screws, Universal, M5

Pack of 10 hexagon socket head fairing screws, suitable for the fairings of various vehicles. Thread: M5 length: 9 mm

Available

€16.99 *

Pack of 10 nuts, M6, with collar and ratchet

Ten pcs. Universal nuts for almost every imaginable application. Thread: M6 With collar & ratchet teeth

Available

€10.99 *

Nut assortment, M6,8,10, with collar

Various collar nuts in practical, reusable sorting box.

Almost gone

€29.95 *

Clutch cable adjusting screw, M6, Universal

Almost universally applicable adjusting screw for clutch cables. Thread: M6 Inner diameter: 8,5 mm

Available

€3.49 *

Clutch cable adjusting screw Domino, M7, Universal

Almost universally applicable adjusting screw for clutch cables. Thread: M7 Inner diameter: 8,5 mm

Available

€5.49 *

Collar nut, M10 x 1.25 mm, with fuse, universal

Universal nut. Used on some vehicles, for example as a sprocket nut.

Available

€2.99 *

Chain wheel bolt, universal, M8x1,25x40mm

Stud bolt for universal use. Used on some vehicles, e.g. for fastening the chain wheel. (Yamaha MT 125 & YZF-R 125)

Available

€3.99 *

Drain plug Oil/ dummy plug Coolant temperature, M14x1.5

M14 screw with 1.5 thread pitch. Can be used e.g. as drain plug for engine oil.

Available

€2.79 *

Stud bolt universal, e.g. exhaust manifold, M6x30

Thread dimension M6x30. Scope of delivery: 1 pc.

Available

€1.59 *

Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)

Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.

Available

€3.59 *

Screw, M4, hexagon socket

Is used by some manufacturers, for example, to secure the sprocket. But it can also be used to secure other things like any other screw.

Available

€1.99 *

Collar nut M8x1,25, Universal

Universal standard nut, can be used for anything. It is used for example as a sprocket nut on some vehicles. OEM part number for comparison purposes 92015-1022

Available

€1.59 *