Tip Use our  Bike-Filter to get only suitable articles displayed.
0 Article
 

Yamaha DT 125 Cladding parts

1. Choose model
DT 125 (1999 bis 2006)
Close filters
3 From 4
No results were found for the filter!
Handguards BULLIT FWA Polisport
Handguards BULLIT FWA Polisport, versch. Colors, universal
The new generation of handguards from Polisport is here: Features All-round plastic (2-point mounting) Complete package including mounting kit (plastic and metal clamp) for 22mm (7/8 ") - handlebar diameter and inner diameter: 13-18mm...

Available

€49.95 *
Winglets / camber protection LSL Winglets / camber protection LSL, universell
LSL Crash Pad®s have been on the market for 20 years and protect your bike from major damage when tipping over or in the event of a fall. The SlideWing® is the next generation of these proven protectors. They offer style, protection and...

Almost gone

€59.90 *
Headlight holder EBR Headlight holder EBR, universell, 40mm, Chrom
Just oldscholl and OG bikes with a lot of chrome are visually enhanced by these chrome-plated metal headlight or turn signal holder once again! Dimensions: Distance mounting hole to clamping standpipe: 65mm Clamping for standpipe: 40mm...

Almost gone

€9.99 *
Handguards S-Dual Polisport
Handguards S-Dual Polisport, universal, versch. Colors
These universal handguards from Polisport prevent too strong a gust of wind on your hands, protect you and handlebar parts in crashes and also look great! The installation is simple and can be done on almost any vehicle without major...

Available

€59.95 *
Handguards MX Air Polisport
Handguards MX Air Polisport, universal, versch. Colors
These universal handguards from Polisport allow a breeze on your hands, protect you and handlebar parts in crashes and also look great! The assembly is simple and can be done on almost any vehicle without major problems. With isolated...

Almost gone

€34.95 *
Lamp grids Lamp grids, universal, round, various Colors
Round metal rally lamp grille universal suitable for bikes with round main headlight. Dimensions: Diameter: 130mm Distance brackets: 128mm Distance mounting hole to grid: 58mm

Available

From €9.19 *
Light mask Polisport HALO LED
Light mask Polisport HALO LED, versch. Farben, universell, mit E-Prüfzeichen
Die Lichtmaske im neuen HALO LED Design kommt direkt mit verschiedenen Anschlüssen, damit sie an den unterschiedlichsten Mopeds verwendet werden können. Wir bieten die Lichtmaske in 5 Farben an, damit sie zu jedem Style passt.

Available

€159.50 * ; From €99.95 *
Handguards MX Force Polisport
Handguards MX Force Polisport, versch. Colors, universal
These universal handguards from Polisport are particularly light. Many air slots and the production of ABS plastic make this possible. The assembly is as usual simple and can be performed on almost any vehicle without major problems. On...

Available

€29.95 *
Start number board Polisport
Start number board Polisport, Universal, versch. Colors
The protruding "cable tie" is used to hold the clutch cable in a position that does not interfere when driving. This start number plate from Polisport was eingentlich used on the Honda CRF 450 motocross. Due to the universal brackets,...

Almost gone

€24.90 *
Start number board Polisport
Start number board Polisport, Universal, versch. Colors
This start number plate from Polisport is eingentlich used on 250s gas motocross. Through the universal brackets, however, it is basically possible to use this start number plate on any other mopeds.

Available

€24.90 *
Headlight mounting Headlight mounting, universell, 28mm, Chrom
To attach your light mask, headlights or turn signals to the fork, you need such an adapter on each side of the fork. From us you get directly the set with 2 pieces in chrome look. Attention the adapters are suitable for 28mm forks....

Available

€69.95 *
Verkleidungsschraube Piaggio OEM
Verkleidungsschraube Piaggio OEM, M6x22, abgesetzt mit Flansch, Kreuzschlitz
Für Verkleidungsteile Schraube mit Flansch / Bund für Verkleidungsteile. Originalersatzteil von Piaggio. OEM-Nummer: 575249 Diese Schraube ist natürlich auch für die Verkleidung anderer Fahrzeugmarken sehr gut geeignet. Maße: Gewinde: M6...

Available

€0.99 *
Rubber washer fairing screw Rubber washer fairing screw, 5,5x14x1,5mm, 10 piece
Universal rubber rings for use under fairing screws. The rubber ring protects the paintwork / attachments from pressure points. 10 pieces of rubber rings 5,5x14x1,5mm are delivered.

Available

€2.99 *
Quick release fairing bolt set Quick release fairing bolt set, 6mm, 10 stck.
Every owner of a racing bike knows how annoying it is to have to dismantle half the fairing for the smallest work steps on the moped. With this quick release set, the annoying screws of the past. The actual screws are provided with an...

Available

€39.95 *
Befestigungsgummisatz Befestigungsgummisatz, f. Motocross-, Nakedbike- Lichtmasken, 4 stck.
Satz universeller Haltegummis für Lichtmasken und Hauptscheinwerfer zur Befestigung am Gabelholm.

Out of Stock

€7.49 *
Fairing screw Rieju OEM
Fairing screw Rieju OEM, M6x20, Torx T30, universal
Standard Rieju replacement fairing screw, but we have marked this as a universal screw in the shop, because it can of course be used on any other vehicle as well. OEM part number for comparison purposes 0/000.460.3031

Available

€1.49 *
Fairing / cockpit screw set Fairing / cockpit screw set, screws + washer + rubber nut M6 (10 pieces each)
6mm fairing screws, or cockpit washer screw set. The set contains 10 screws, the matching washers and 10 rubber nuts.

Almost gone

€15.99 *
Cladding screw Cladding screw, M6x14, Torx T-30
Spare fairing screw. It can of course be used on any other vehicle. Please note dimensions!

Available

€1.49 *
Cladding screw
Cladding screw, M6x14, Torx T-30, 5 stck.
Spare fairing screw. It can of course be used on any other vehicle. Note dimensions! Scope of delivery 5 pcs.

Available

€6.99 *
Cladding screw Cladding screw, M6x10, Torx T-30, universal
Simple, very short fairing screw with flat head and Torx hexagon socket. Technical data length: 10mm Thread: M6 Width across flats: T-30

Available

€1.49 *
Cladding screw Cladding screw, M6x10, Torx T-30, universal, 5 stck.
Simple, very short fairing screw with flat head and Torx hexagon socket. Can of course be used on all vehicles. Scope of delivery: 5 pcs. Technical data length: 10mm Thread: M6 Width across flats: T-30

Available

€6.99 *
Cladding screw Cladding screw, Universal, M5
Screw with collar and hexagon socket, for fairing parts, suitable for various vehicles. Thread: M5 length: 9 mm

Available

€1.99 *
Fairing / cockpit screw set Fairing / cockpit screw set, M5, screws, washers & rubber nut, (10 pieces each)
5mm fairing screws, or cockpit windscreen screw set. The set contains 10 screws, the matching washers and 10 rubber nuts. suitable for hole diameters 10mm to 11mm

Available

€15.99 *
10 pack fairing screws 10 pack fairing screws, Universal, M5
Pack of 10 hexagon socket head fairing screws, suitable for the fairings of various vehicles. Thread: M5 length: 9 mm

Available

€16.99 *
3 From 4

If you had a crash, or your motorcycle simply fell over, the fairing parts of your Yamaha DT 125 are often are often the hardest hit. If a simple repainting or repairing of the broken or battered fairing is no longer sufficient, the only option is to replace the part. We offer an assortment of Yamaha original fairing parts, as well as high-quality aftermarket replicas. We test the quality of the spare parts to ensure easy replacement and optimal fit of the fairings. fairings to ensure.

Disguise parts for Yamaha DT 125 buy cheap

Are you looking for cheap fairing parts for your DT 125? We offer you not only a but also the best price. If you should see a fairing part cheaper at another supplier another supplier, just let us know and we will also offer you the cheaper price.

In addition, you always benefit from our fast shipping and motorcycle filter. So you can be sure that the fairing also fits exactly on your Yamaha DT 125.

Viewed