1. Choose model
MT 125 (ab 2024, Euro5+)
MT 125 (2021 bis 2023, RE40 - Euro5)
MT 125 (2020 bis 2020, RE39 - Euro4)
MT 125 (2017 bis 2019, RE29 - Euro4)
MT-125 (2014 bis 2016, RE11 - Euro3)
2. Filter by category
No results were found for the filter!
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
Throttle cables, clutch cables and the chain of your motorcycle should be subject to regular maintenance. For this purpose special Teflon sprays are used, which penetrate deep into the inside of the Bowden cable. If the cable is not...
Available
€20.95
*
;
€15.99
*
Faulty braking effect is life-threatening and often due to a leaking brake pump. Repair is not always sensible or possible, in many cases there is no way around replacement. Technical data Distance between the mounting holes: 50 mm...
Available
€27.95
*
Universally applicable clutch cable. Delivery includes universally usable clamps. Without cable sheathing.
Available
€4.49
*
Universal hand brake cylinder for the front disc brake. The complete fitting is delivered including brake lever and is equipped with a brake light switch. The brake cylinder is ideal for handlebar conversions and/or as an alternative...
Available
€22.95
*
Tired of the boring brake fluid cover? No problem! We offer you here a fat CNC milled, of course optically embellished cover! The cover itself consists of two parts, which are connected by a small, already premounted stainless steel...
Available
€12.95
*
The Radical CNC brake levers already known and very popular from the KTM Duke 125 are now also available for the Yamaha YZF-R 125 (year of manufacture 2014). Compared to the KTM levers, we have of course adapted the available colour...
Available
€59.90
*
;
From €44.90
*
As a little gimmick we can offer a CNC manufactured adjusting screw for e.g. clutch cables. The adjusting screw fits on all vehicles with M8 adjusting device.
Out of Stock
€11.95
*
Short-stroke throttle handles offer the possibility to reduce the angle of the pull to be pulled and thus the total travel. Particularly with larger carburettors from 19 mm upwards, the turning movement is significantly reduced and thus...
Available
€29.95
*
The universal repair set for the throttle cable and/or shift cable consists of two new cables with 2.5m length and various connections for cable attachment.
Available
€12.99
*
;
€8.79
*
NEW
Passenger footrests, Beta RR 125 from year 21, various colors Colors
This pillion footrest set incl. bracket is the ideal solution for anyone who wants both functionality and style on their bike. The footrests are CNC-milled and offer high precision and quick, uncomplicated installation. Perfectly matched...
Available
€77.95
*
NEW
This item is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : B5GF583V0000 Scope of delivery: 1
Out of Stock
€147.90
*
NEW
Fork seal set SKF HD, Beta RR 2T 125/200/300/400 ab Bj 20
When developing the fork seals, SKF focused on maximum sealing performance and therefore uses the highest quality materials for fork seals and dirt wipers. The sealing kits from SKF offer a particularly low "stick-slip" effect - in other...
Almost gone
€35.95
*
NEW
Fork seal set SKF, Beta RR 2T 125/200/300/400 ab Bj 20
When developing the fork seals, SKF focused on maximum sealing performance and uses the highest quality materials for fork seals and dirt wipers. The sealing kits from SKF offer a particularly low "stick-slip" effect - in other words,...
Almost gone
€34.95
*
NEW
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
NEW
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
NEW
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
NEW
Sieht deine Gabel auch noch kahl und langweilig aus? Das kannst du jetzt ganz einfach ändern. Mit den Forkshrinks von Factoryfork, kannst du deine Gabel passend zu deinem Bike individualisieren. Die Schoner passen an alle gängigen Bikes...
Available
€49.95
*
NEW
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
NEW
Does your fork still look bare and boring? You can now easily change that. With the Forkshrinks from Factoryfork, you can customize your fork to match your bike. The protectors fit all common bikes and are easy to install. You can find...
Available
€49.95
*
NEW
Throttle cable intermediate tensioner, universell
This intermediate tensioner is a practical accessory for adjustments or simply to adjust the tension of a Bowden cable. With a spring travel of 18 mm, it enables precise adjustment of the cable tension.
Available
€1.50
*
NEW
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : B6GH25010000 Scope of delivery: 1
Almost gone
€219.90
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 1CKF62400100 Scope of delivery: 1
Almost gone
€26.95
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : B7DF62820000 Scope of delivery: 1
Almost gone
€11.99
*
With the right parts on your brakes, chassis, frame and suspension from your Yamaha MT 125, you provide for the optimal driving experience and maximum safety.
"Who brakes later drives faster", you know. But then you should also have good brakes! Don't save at the wrong end and make sure that you regularly check the brake pads and discs on your MT 125. Brake discs on your MT 125 checks.
With the right levers and cables, you ensure a pleasant response when braking and clutching. clutch. This should not be underestimated, once you have sat in the saddle for half a day and pulled a few Hundred times on the lever has pulled, it can already be exhausting.
.
With the right fork and the optimal Stoßdämpfern on your Yamaha MT 125, you provide für your perfect comfort. Or not, if you want to have more of a sporty seat and driving feel.
Viewed