1. Choose model
MT 125 (ab 2024, Euro5+)
MT 125 (2021 bis 2023, RE40 - Euro5)
MT 125 (2020 bis 2020, RE39 - Euro4)
MT 125 (2017 bis 2019, RE29 - Euro4)
MT-125 (2014 bis 2016, RE11 - Euro3)
No results were found for the filter!
Replacement clamp for your Radical rear silencer
Almost gone
€19.99
*
Replacement mounting plate with 2 screws. Used for mounting GP-Pro exhaust systems on Yamaha YZF-R 125 and MT 125 from Bj. 2021. But can also be used as a bracket for tinkering with all sorts of other uses. Technical data Dimensions:...
Available
€2.49
*
Spare part for Arrow exhaust systems.
Available
€9.99
*
Simple exhaust spring, to hang the exhaust system on the cylinder, or to connect the muffler & manifold. Can also be used for other tinkering. The spring has ring eyelets at both ends. A little trickier to fit, but the hold is better!...
Available
€2.59
*
Exhaust systems become louder with increasing age. One reason for this is that impurities from the engine, such as combustion residues, are deposited in them. In the same way it can also happen that insulation wool comes off the exhaust...
Available
€6.99
*
Exhaust plugs are used during transport and mothballing of motorcycles to prevent rainwater from entering the exhaust system. This exhaust plug from Radical comes with a Remove before Ride Keylace.
Available
€6.99
*
Spare fuse ring for the dB-Killer of the Radical GP-Carbon. Technical data Ø= 50mm
Available
€9.49
*
Replacement gasket for the exhaust manifold of Yamaha YI Euro 5 engines. Yamaha original spare part made of copper & metal mesh. OEM part number for comparison BK7E46130000
Available
€12.99
*
Out of Stock
€11.96
*
Cover cap for the mounting screw of the dB-Killer of SBK and LV-One exhaust systems.
Available
€9.99
*
Replacement clamp from LeoVince made of real carbon. According to the manufacturer, fits most LV-One and LV Pro exhaust systems for Yamaha RE29 models, such as the 14261EK .
Almost gone
€44.95
*
Replacement clamp from LeoVince made of real carbon. Suitable for the LV-One Evo II exhaust system 8799 of Yamaha RE11 models
Almost gone
€44.95
*
Rubber bearing exhaust mounting Watts, Universal, various colours
Colored rubber bearing for mounting the exhaust. It counteracts the expansion and contraction of the metal caused by heat development and thus prevents cracks in the frame or exhaust itself.
Available
€9.99
*
Spare part for Arrow exhaust systems. Can also be used for exhaust systems of other manufacturers with the same diameter.
Available
€10.00
*
Arrow replacement seal. Can be used not only with Arrow, but also with all other exhaust systems with 32mm diameter and plug-in flange. Technical data Diameter (inside): 32mm width: 30mm
Available
€10.00
*
Small spare part for Arrow Thunder exhaust systems. This washer is mounted to the exhaust clamp to be able to fix it evenly. Arrow OEM Part Number 5480004 Suitable for Arrow "51513 - Thunder" exhaust silencer
Available
€3.99
*
Replacement exhaust clamp for Arrow Thunder silencer. Suitable f. Silencer: 51513 (AK/AKN/AO/AON/PK/PO) - Yamaha MT 125 51503 (AK/AKN/AO/AON/PK/PO) - Yamaha YZF-R 125 52505 (AK/AKN/AO/AON/PK) - Yamaha WR 125
Available
€25.00
*
Protective rubber, for mounting under the exhaust clamp. Protects your silencer from unsightly scratches. (For Arrow Thunder silencer). Suitable f. Silencer: 51513 (AK/AKN/AO/AON/PK/PO) - Yamaha MT 125 51503 (AK/AKN/AO/AON/PK/PO) -...
Available
€14.95
*
Available
€7.49
*
Copper seal ring. Technical data Inner diameter: 31.50 mm Outside diameter: 40.00 mm thickness: 4 .00 mm
Available
€5.95
*
Replacement graphite manifold gasket. Fits in principle all vehicles with straight flange or plug-in flange connections up to 42mm diameter. (42mm is for example the original size of the Yamaha YI-3 & YI-4 engine).
Available
€4.99
*
Aluminium/steel manifold gasket from Athena. Can be used on all vehicles with the corresponding outlet dimension of 45mm diameter.
Available
€4.50
*
Available
€1.59
*
Outlet screw set, Cross/ 10 hexagon socket, M6 x 16mm (pair)
Exhaust bolt set for almost all common motorcycles. Can be mounted with a 10 mm wrench and a Phillips screwdriver. Dimensions: M6 x 16mm. Delivered are 2 pieces.
Available
€3.59
*
Viewed