1. Choose model
WR 125 X/R (2013 bis 2017, DE072 - Euro3)
WR 125 X/R (2009 bis 2013, DE071 - Euro3)
2. Filter by category
No results were found for the filter!
Out of Stock
€647.86
*
Ball bearing camshaft 6906, 30x47x9mm, YI-3 motors
This item is a cheap alternative to the expensive original spare part. The bearing corresponds to the original in shape, dimensions and function. Ball bearing open 6906 - 30x47x9mm suitable for the camshaft for YI-3 OHC engines.
Available
€3.99
*
Cylinder head revision kit, Big Bore, YI-3 Motoren
This is a set of spare parts for Big Bore cylinder heads, such as NK600.75 . So if your tuning cylinder head is struggling with worn parts, you do not need a new one directly. ⚠️The matching valves for the cylinder head must be ordered...
Available
€149.90
*
This item is an original spare part of the brand Yamaha/Minarelli This ball bearing is located in the cylinder head and guides the camshaft. Often this bearing can only be removed mechanically and is damaged. A new bearing should...
Available
€3.99
*
Cylinder head valve kit, Minarelli YI 125cc Euro3/4 (e.g. Yamaha YZF-R, MT, WR / Beta RR and many more)
A cylinder of 4-stroke engines is controlled by several valves. These in turn are driven by the camshaft and open or close the respective combustion chamber of the engine. Losses of compression pressure in the cylinder can in many cases...
Almost gone
€74.90
*
Cylinder head Ceramic 150cc, Yamaha / Minarelli YI- Engines
This cylinder head is an optimized version of the original head with larger intake & exhaust valves (19 & 22mm). Due to the enlarged valves, the filling in the cylinder can be improved, which thus also immediately leads to an increase in...
Almost gone
€415.90
*
To get the absolute maximum out of the Yamaha & Minarelli YI engines this cylinder head from Naraku with 66mm Ø is indispensable. The cylinder head is designed for use with the 200cc Ceramic cylinder kit from Naraku. More clearance,...
Almost gone
€399.00
*
This article is an original spare part (OEM) of the manufacturer Yamaha.
Available
€1.99
*
We offer you a cylinder kit for the Yamaha YZF-R125 with three programs stored on the ignition unit "Force Master 1" for the optimal adjustment of the injection to the driving application. With the first program the original ignition...
Available
€355.00
*
We offer you the Malossi cylinder kit, with full 180cc capacity for the Yamaha YZF-R125 (until 2013), and WR 125. The Malossi "Force Master" control unit, with four stored programs, and the possibility of fine-tuning the mixture in any...
Out of Stock
€599.90
*
Rocker arm set, Yamaha / Minarelli YI 4-Takt Motoren
The rocker arms operate the valves in the 4-stroke cylinder head. Since the part actuated by the camshaft is mounted is mounted on ball bearings it is mechanical exposed to mechanical wear. These rocker arms are the perfect & cheap...
Available
€39.90
*
Naraku 200cc Big-Bore ceramic cylinder kit with 66mm bore and hard chrome plating, suitable for Yamaha WR, YZF-R, MT and many other 125cc with Yamaha YI engine. Supplied as shown with all seals and small parts necessary for assembly. The...
Available
€229.90
*
Nockenwelle Original Replica, Yamaha YI-3/4 Motor
Poorly maintained Yamaha YI engines often have problems with a run-in camshaft. This is especially noticeable in the loss of power that occurs. Also the readjustment of the valves brings then nothing more, because the chrome layer of the...
Available
€49.90
*
If the timing chain tensioner is replaced, it may be necessary to renew its seal as well. Here we offer this spare part original from Yamaha. OEM part number for comparison purposes 1DYE22130000
Out of Stock
€4.24
*
Compared to the 150cc cylinder kit from Naraku, the 177cc cylinder has of course been given an even larger bore which in turn can further optimise the performance of the engine. Since in cubic classes from 160cc on the original ECU...
Almost gone
€219.90
*
To get the absolute maximum power out of Yamaha's YI-3 engines, this 62mm Ø Naraku cylinder head is indispensable. More passage, reinforced valve springs and larger valves (21/23mm) let every cylinder with 62-64mm bore breathe properly....
Almost gone
€429.90
*
Small component with great effect. The valve stem seal influences for example the oil consumption. Hard "stems" let oil run down the valve, which is then burned. Whenever work is carried out on the dismantled cylinder head, it is...
Available
€3.99
*
In addition to the 125cc standard cylinder kit, Airsal also offers a T6 racing version. The main difference of the T6 compared to the 125cc standard cylinder is the improved piston, which significantly changes the combustion chamber...
Available
€145.95
*
Replacement gaskets for the 180cc 4-stroke cylinder from Top Performances.
Available
€22.95
*
Replacement pistons in original Airsal dimensions, suitable for the Yamaha YZF R-125 or Yamaha WR 125 engine. Delivery includes piston rings, piston pin clips and piston pins.
Available
€41.95
*
Spare rings for the Yamaha YI-3 OHC engine. (Yamaha YZF R125, WR 125, etc..)
Available
€17.99
*
Replacement gaskets for the 125cc Yamaha YZF and WR engine.
Available
€17.99
*
The Airsal YI-3 cylinder for the Yamaha 125cc engines is supposed to be a cheap alternative to the expensive original cylinder. Airsal not only uses a copy of the original cylinder, but also improves the coating, the piston and the...
Available
€139.90
*
If you are looking for a strong cylinder kit for the WR 125, then the Athena 183cc cylinder kit is just the thing. It impresses especially with its durable Nikasil coating and the light cast iron piston, which is made of aluminium. The...
Almost gone
€549.90
*
The cylinder is the heart of your Yamaha WR 125. This is where all the power at your disposal comes from. In modern engines are built to be very robust and durable. Nevertheless it can happen that a part of your cylinder breaks and you need a spare part. This is the case, for example, with the engine gasket from time to time. In this case, you should also carry out a repair on your WR 125, because a defective cylinder not only cylinder not only costs you performance on the road, but in the worst case it can also lead to a major more serious (and more expensive) damage to other areas of the engine.
In addition to replacement pistons, you can also find replicas of the original 125cc cylinders. So you can get the "factory condition" of your Yamaha WR 125 at any time.
Darüberhinaus we offer some tuning packs and tuning cylinders. Here there are different sizesößen between 125cc to 183cc displacement. So you increase the performance of your WR 125 für the race track.
.
Viewed