1. Choose model
WR 125 X/R (2013 bis 2017, DE072 - Euro3)
WR 125 X/R (2009 bis 2013, DE071 - Euro3)
2. Filter by category
No results were found for the filter!
We can now offer you an oil drain plug that is at least of the same quality and standard as the original. This plug also corresponds to the original in terms of shape, dimensions and function. This engine-specific spare part is...
Available
€19.99
*
Available
€2.99
*
Simple exhaust spring, to hang the exhaust system on the cylinder, or to connect the muffler & manifold. Can also be used for other tinkering. The spring has ring eyelets at both ends. A little trickier to fit, but the hold is better!...
Available
€2.59
*
Da es sich hierbei um ein motorenspezifisches Ersatzteil handelt, passt es auf diverse Modelle der Marken: Fantic, Beta, Rieju, HM, Husqvarna und Yamaha. Benutz den Bikefilter um zu sehen, ob dein Bike dabei ist. Ersatz- Ablassschraube...
Available
€16.99
*
Typical brake disks, or sprocket bolt with blue dry thread lock (medium strength). Can also be used anywhere else on the moped. Thread: M6 Head: Flat / Torx Length: 20 mm
Available
€1.99
*
During maintenance work on the brake system, these small parts are often lost. The bleeder nipple can then become clogged and maintenance of the brake system becomes impossible the next time. A cover should therefore always be installed!
Available
€2.99
*
Wheel bearing which can be used for different vehicles as front or rear wheel bearing. Note Please compare the technical data of this bearing with your original wheel bearing. Technical data Outside diameter: 32 mm width: 10 mm Inner...
Available
€5.99
*
Universal SKF bearing of type "6202-2RS", sealed on both sides. Suitable for example as rear or front axle bearing. But please compare your bearing type before ordering! Technical data Type : 6202 Inner diameter : 15 mm Outside diameter...
Available
€6.29
*
Magnetic oil drain plugs collect the metallic abrasion at the magnet and thus protect the engine & gearbox from excessive wear. Supplied with sealing ring.
Available
€5.99
*
If the washers of the old head bolts are worn, bent or can no longer be removed from the old head bolt, they must be replaced. Complete set of Yamaha original spare parts. OEM part number for comparison 902010860900
Available
€1.99
*
Standard cylinder head bolt set from Yamaha for the YI-3 engine. Head bolts must always be replaced whenever the cylinder head is disassembled. Scope of delivery: 1 OEM part number for comparison 901050885000
Available
€9.99
*
;
€7.49
*
Nut with M7 thread for fixing the cylinder head. A set of 4 special nuts is supplied. The nuts have a length of 13mm and have a collar. Special thread M7. Suitable for all Minarelli, Kymco, MBK, Yamaha, CPI, Keeway engines and other...
Available
€3.99
*
6mm clamp for fuel hoses. Delivered is 1 piece.
Available
€1.99
*
We can supply these spare clips for your fairing at a reasonable price. 10 pieces - For M6 screws!
Available
€8.49
*
Here we can offer you 10 sheet metal nuts incl. the suitable lens head cross recessed screws. The screws and lenses are especially suitable for fixing the fairing. The brass-coloured screws also give your moped a noble gold screw look....
Available
€5.19
*
Hose clamps can be used in almost any application. Whether as reinforcement of the rubber mountings of the exhaust, or as a normal water hose clamp.
Available
€1.29
*
Motorcycle mirrors as well as the manufacturer's built-in mount on the handlebars are unfortunately not always the same. So it is sometimes necessary to get suitable adapters for the mirror to be able to screw the mirror onto the moped....
Available
From €2.50
*
NEW
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 901762208100 Scope of delivery: 1
Out of Stock
€15.95
*
NEW
Bremssattelstift Yamaha OEM OEM Artikelnummer: 22BF59242000
Almost gone
€10.99
*
NEW
Schraube Luftfiltergehäuse Yamaha OEM OEM Artikelnummer: 9010906X0500
Available
€4.99
*
NEW
Ball bearing Nachi, 6202/NSE9
Quality bearings from Nachi Increased service life of wheel bearings! Outer diameter: 35 mm Width: 11 mm Inner diameter: 15 mm Waterproof
Almost gone
€7.99
*
Throttle cable intermediate tensioner, universell
This intermediate tensioner is a practical accessory for adjustments or simply to adjust the tension of a Bowden cable. With a spring travel of 18 mm, it enables precise adjustment of the cable tension.
Available
€1.50
*
This article is an original spare part (OEM) from Yamaha OEM part number for comparison purposes : 905062200200 Scope of delivery: 1
Almost gone
€22.95
*
Bei diesem Artikel handelt es sich um ein Originalersatzteil (OEM) der Firma Yamaha OEM Artikelnummer zu Vergleichszwecken : 953170560000 Ersetzt die Artikelnummern: 953010560009; 953020560009; 953060560000; 953070560000; 9530M0560000;...
Almost gone
€1.99
*
Viewed