1. Choose model
XSR 125 (ab 2021, RE44 - Euro5)
No results were found for the filter!
This item is an original Yamaha brand. A set contains 2 valve caps for each Schrader valve. Anodized finish for durability.
Available
€7.99
*
Brake fitting/ master cylinder, universal, 22mm, versch. Colors
Technical data: Mirror mount M10 x 1.25 right-hand thread 17,5mm piston for 22mm handlebar Banjo bolt M10x1,25 for brake line external reservoir Lever travel adjustable
Available
€89.95
*
Blackway is a French brand known for its high quality styles. The Diabolos are extensions that are attached to the rear of the bike to create an optimal mount for assembly stands.
Available
€9.99
*
Renthal is one of the leading brands when it comes to quality handlebar components for enduro and supermoto bikes! We are pleased to offer you Renthal products in our store. These are CNC machined handlebar clamps with 0mm offset for...
Available
€89.90
*
The color selection was matched exactly to the 28.6mm cross handlebars from Stage6 range! The clamps fit but also on other 28mm handlebars. The handlebar clamps are CNC machined and anodized in color, with lasered logo on the top (2...
Available
€45.95
*
Blackway is a French brand known for its high quality styles. The Diabolos are extensions that are attached to the rear of the bike to create an optimal mount for assembly stands.
Available
€9.99
*
Brake fluid reservoir, universell, rot
Herewith we offer you a cheap brake fluid reservoir with stylish red CNC parts. The lid comes directly incl. seal, clamps and hose (10cm). Lid, mounting and screw cover are anodized red. In addition, the tank has the typical level...
Out of Stock
€10.99
*
CNC handlebar brace, red, 22mm
This inexpensive and adjustable handlebar brace (225mm - 255mm) serves the stability of the handlebar and minimizes vibrations significantly. It fits Stadard handlebars with 22mm diameter and comes directly with an allen to adjust the...
Out of Stock
€19.99
*
Puigs handlebar ends combine design and utility! These lightweight and beautiful bar ends dampen vibrations very well despite their low weight. Dimensions: Length: 40mm Weight: 68g These bar ends may be mounted and legally driven without...
Available
€29.95
*
;
€17.99
*
To protect against stone chips, or as a simple styling part Doppler offers here a protective cover for brake cylinders at the rear footrest. The cover is by the sleeves and long holes as far as possible universally suitable....
Available
From €19.99
*
Mirror image, various colours
This mirror mount allows you to mount all mirrors with M8 thread on downhill handlebars or generally on handlebars where this mount is not available. Inner diameter: 22mm
Available
€9.99
*
Brake fluid reservoir, Universal, CNC milled
CNC milled brake fluid reservoir incl. handlebar mount. Available in different colours.
Almost gone
€18.90
*
MTKT offers a complete set, consisting of brake lever armature and clutch lever armature. A master brake cylinder for hydraulic brakes is also included. The individual parts of the set are mostly CNC milled and have an extremely...
Almost gone
€199.00
*
The handlebar clamps from Voca Racing can easily be changed from 22mm to 28mm handlebars. Ultra light design, aggressive look and high quality aluminium - this best describes the new Voca handlebar clamps. The complete set consists of...
Almost gone
€43.95
*
Aluminium screws with standard hexagon socket head. Available in different colours and lengths. Delivered are 6 pcs.
Available
From €6.99
*
Set accents, it is called with these anodized M12 aluminum nuts for the wheel axle. The nuts are available in the colours blue and gold anodised. A nut in the corresponding colour is supplied.
Available
€5.99
*
By means of an oil filler plug, which stands out from the rest in colour, you can further refine the tuning of your vehicle and make it a real eye-catcher. The screw has an additional hole for a safety wire, which is not included in the...
Available
€29.95
*
;
From €10.99
*
Here we offer an oil filler plug suitable for Yamaha 125cc engines. The screw has a M26 thread and can therefore be used with e.g. Yamaha YZF-R 125, Yamaha MT 125 or Yamaha WR 125. Available in different colours.
Almost gone
€24.95
*
Valve caps Bullet, diverse colors
These valve caps provide the optical fine tuning. The "bullets" do not only look chic due to their different anodised colours, but come in the form of a cartridge. Scope of supply: 1 pair.
Available
€6.00
*
On some mopeds it is possible to attach mounting sleeves for a motorcycle stand to the rear swing arm. We can offer you three different color anodized, CNC-milled mounting sleeves with M6 thread. Note Red and blue unfortunately no longer...
Almost gone
€16.99
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Yamaha XSR 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the XSR 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed