1. Choose model
U 125 (ab 2021)
No results were found for the filter!
Aluminum fairing screws from Motoflow, in colored anodized finish. The screws are provided with wide lens head and a hexagon socket. So the fairing holds securely in place. Since it is aluminum, these screws are not suitable for high...
Available
€3.99
*
Brake & clutch lever guards are used on racing motorcycles similar to handguards on motocross bikes. However, they are intended less to protect the hands from mud and debris and more to protect the levers from a fall. That way, if the...
Available
€29.99
*
We offer a complete set consisting of adjustable brake lever and clutch lever armature. Also included is a master cylinder for hydraulic brakes. The individual parts of the set are mostly CNC milled and have an extremely attractive...
Available
€99.90
*
;
€69.90
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations are only very slightly pronounced in the 125 class motorcycles anyway, it is not necessary to perform vibration dampers as absorber...
Available
€14.99
*
;
From €9.99
*
Fits 28.5mm handlebars. The handlebar is quite flat on this version. Of course, there is also the matching intake or the matching adapter for the standard 22mm handlebar mounts. The intake is completely CNC machined and anodized...
Available
€29.95
*
Vibration dampers are actually used to reduce vibrations in the steering tube, since these vibrations occur only very slightly on most 125s anyway, it is not necessary to design vibration dampers as absorber weights. Here we can offer...
Available
€17.99
*
;
€12.99
*
CNC machined brake fluid reservoir from Motoflow. Available in different colors.
Available
€19.95
*
;
From €15.00
*
Stand mounts are used to use motorcycle paddock stands with claw mounts. The stand holders are 2-part black and orange anodized.
Available
€12.90
*
Simple CNC milled styling part for KTM Duke or RC 125, the screw is located at the top of the clutch housing. Great optical effect for a small budget!
Available
€13.99
*
As a little gimmick we can offer a CNC manufactured adjusting screw for e.g. clutch cables. The adjusting screw fits on all vehicles with M8 adjusting device.
Out of Stock
€11.95
*
The most visually dangerous valve caps you can buy. The new valve caps, in the design of a hand grenade, are a real eye-catcher. Available in different colours. Scope of supply: 1 pair.
Available
€2.99
*
The footrest extension from Movetronix gives your passenger the opportunity for a more relaxed ride. The footrest extension is clamped to the footrest and therefore offers more space for the pillion rider's foot. The extension is made of...
Almost gone
€129.90
*
Mirror thread cover caps, black, for M10 thread, CNC milled
Cover for threads of the original mirrors, if you install handlebar end mirrors on your motorcycle, the existing mounts remain unused. With this aluminum cover for M10 threads, you can discreetly conceal them.
Available
€10.99
*
Hier haben wir neue Lenkerenden von Puig, den SPEED. Aus einem Aluminiumblock gefräst und in sieben verschiedenen Farben für euch zur auswahl. Das Design verbindet die Einfachheit der Linien und den Minimalismus des Renn Charakters mit...
Available
€29.95
*
Hier haben wir neue Lenkerenden von Puig, den SHORTY. Aus einem Aluminiumblock gefräst und in sieben verschiedenen Farben für euch zur auswahl. Das Design verbindet die Einfachheit der Linien und den Minimalismus des Renn Charakters....
Available
€29.95
*
This headlight bracket is an essential part for mounting the universal LED headlight from Puig. It is made of high-quality CNC-milled aluminum and is therefore very robust and durable. In black, it matches the headlight very well and...
Almost gone
€145.90
*
The lever protection set serves to protect the lever from breaking or bending when falling. The set is made of sturdy aluminum and therefore provides effective protection against falls.
Available
€44.95
*
Kurzhubgasgriff, universell, Chrom
Der Universal Kurzhubgasgriff dient der Verkürzung des Gaswegs zur kompletten Gasannahme. Somit kann man mit ihm den Griff in einem anderen, angenehmeren Winkel greifen und hat trotzdem noch die volle Performance des Bikes. Mit seinen 22...
Available
€32.95
*
Handlebar riser CNC, 22mm, versch. Heights, incl. screws
Due to the slotted holes suitable for almost all mopeds and enduros! made of high quality CNC aluminum Handlebar mounts for Ø22 mm handlebars Increase the handlebar by 25/35mm
Available
€49.95
*
Locking bolt cylinder head Most Racing, M14x1,5, versch. Colors
This high quality aluminum sealing bolt with thread size M14x1.5 and matching copper sealing ring is an indispensable accessory for anyone looking for a reliable and durable sealing bolt. With its versatility, this bolt is perfect for...
Available
€17.95
*
Locking bolt cylinder head Most Racing, M12x1,5, versch. Colors
The aluminum locking bolts with thread size M12x1.5 and matching copper sealing ring are the perfect solution for closing holes, such as the temperature sensor hole on Derbi Euro4 models. Of course, the bolt is also suitable for other...
Available
€17.95
*
Brake cylinder Most, universal, 22mm, front, versch. Colors
MOST Racing hereby offers a radial CNC brake cylinder anodized in your favorite color! The assembly is very easy and fits all 22mm handlebars. Technical data: Type 3 or 4 fingers Adjustable Breakage protection Piston diameter 17.5 For...
Available
€99.95
*
This item is an original Yamaha brand. A set contains 2 valve caps for each Schrader valve. Anodized finish for durability.
Available
€7.99
*
Brake fitting/ master cylinder, universal, 22mm, versch. Colors
Technical data: Mirror mount M10 x 1.25 right-hand thread 17,5mm piston for 22mm handlebar Banjo bolt M10x1,25 for brake line external reservoir Lever travel adjustable
Available
€89.95
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your Zontes U 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the U 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed