1. Choose model
Duke 390 (2017 bis 2020)
No results were found for the filter!
Blackway is a French brand known for its high quality styles. The Diabolos are extensions that are attached to the rear of the bike to create an optimal mount for assembly stands.
Available
€9.99
*
Renthal is one of the leading brands when it comes to quality handlebar components for enduro and supermoto bikes! We are pleased to offer you Renthal products in our store. These are CNC machined handlebar clamps with 0mm offset for...
Available
€89.90
*
The color selection was matched exactly to the 28.6mm cross handlebars from Stage6 range! The clamps fit but also on other 28mm handlebars. The handlebar clamps are CNC machined and anodized in color, with lasered logo on the top (2...
Available
€45.95
*
Blackway is a French brand known for its high quality styles. The Diabolos are extensions that are attached to the rear of the bike to create an optimal mount for assembly stands.
Available
€9.99
*
Brake fluid reservoir, universell, rot
Herewith we offer you a cheap brake fluid reservoir with stylish red CNC parts. The lid comes directly incl. seal, clamps and hose (10cm). Lid, mounting and screw cover are anodized red. In addition, the tank has the typical level...
Out of Stock
€10.99
*
CNC handlebar brace, red, 22mm
This inexpensive and adjustable handlebar brace (225mm - 255mm) serves the stability of the handlebar and minimizes vibrations significantly. It fits Stadard handlebars with 22mm diameter and comes directly with an allen to adjust the...
Out of Stock
€19.99
*
Puigs handlebar ends combine design and utility! These lightweight and beautiful bar ends dampen vibrations very well despite their low weight. Dimensions: Length: 40mm Weight: 68g These bar ends may be mounted and legally driven without...
Available
€29.95
*
;
€17.99
*
To protect against stone chips, or as a simple styling part Doppler offers here a protective cover for brake cylinders at the rear footrest. The cover is by the sleeves and long holes as far as possible universally suitable....
Available
From €19.99
*
Mirror image, various colours
This mirror mount allows you to mount all mirrors with M8 thread on downhill handlebars or generally on handlebars where this mount is not available. Inner diameter: 22mm
Available
€9.99
*
Brake fluid reservoir, Universal, CNC milled
CNC milled brake fluid reservoir incl. handlebar mount. Available in different colours.
Almost gone
€18.90
*
The Puig lever set offered here by us consists of an adjustable brake lever, clutch lever and the corresponding adapters for mounting on the vehicle. The levers, as well as the adapters from Puig are provided with a German KBA test...
Almost gone
From €98.95
*
With this adapter Puig clutch levers can be attached to the vehicle. Puig adapter pieces are always made of aluminium and black anodized. Delivered is 1 piece. Without matching clutch lever! This must be ordered separately. According to...
Almost gone
€29.95
*
With this adapter Puig brake levers can be attached to the vehicle. Puig adapter pieces are always made of aluminium and black anodized. 1 piece is delivered. Without matching brake lever, this must be ordered separately. According to...
Almost gone
€29.95
*
The Puig lever set offered here by us consists of an adjustable brake lever, clutch lever and the corresponding adapters for mounting on the vehicle. The levers, as well as the adapters from Puig are provided with a German KBA test...
Available
From €113.90
*
MTKT offers a complete set, consisting of brake lever armature and clutch lever armature. A master brake cylinder for hydraulic brakes is also included. The individual parts of the set are mostly CNC milled and have an extremely...
Almost gone
€199.00
*
Fußrastenset von Puig. Dieses Set besteht immer aus 2 Fußrastenadaptern sowie den Fußrasten selbst in der gewählten Farbe. Die Fußrasten, sowie die beiliegenden Adapterstücke sind aus Aluminium gefertigt und nachträglich eloxiert....
Available
From €64.95
*
The handlebar clamps from Voca Racing can easily be changed from 22mm to 28mm handlebars. Ultra light design, aggressive look and high quality aluminium - this best describes the new Voca handlebar clamps. The complete set consists of...
Almost gone
€43.95
*
Aluminium screws with standard hexagon socket head. Available in different colours and lengths. Delivered are 6 pcs.
Available
From €6.99
*
Set accents, it is called with these anodized M12 aluminum nuts for the wheel axle. The nuts are available in the colours blue and gold anodised. A nut in the corresponding colour is supplied.
Available
€5.99
*
With these footrest adapters Puig footrests can be mounted on the KTM Duke. These adapters fit the front footrests. Supplied in pairs.
Almost gone
€34.95
*
Here we offer you a simple system for styling your footrests from Puig. The footrest itself is simply slid onto a mounting piece (sold separately). This way the footrest can be replaced quickly and easily, even if it breaks or breaks due...
Available
€39.95
*
;
From €27.95
*
Valve caps Bullet, diverse colors
These valve caps provide the optical fine tuning. The "bullets" do not only look chic due to their different anodised colours, but come in the form of a cartridge. Scope of supply: 1 pair.
Available
€6.00
*
On some mopeds it is possible to attach mounting sleeves for a motorcycle stand to the rear swing arm. We can offer you three different color anodized, CNC-milled mounting sleeves with M6 thread. Note Red and blue unfortunately no longer...
Almost gone
€16.99
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your KTM Duke 390 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the Duke 390. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed