1. Choose model
RC 125 (2017 bis 2020, Euro4)
RC 125 (2014 bis 2016, Euro3)
No results were found for the filter!
The illuminated ring for the ignition lock of the KTM Duke/RC 125 gives your motorcycle a visual eye-catcher. This ring is designed for the ignition lock of the KTM Duke/RC 125 and provides a reference point for the ignition lock even in...
Available
€14.99
*
Tire valve caps from Radical Racing with a sporty and modern design.
Available
€5.49
*
Noble anodized short stroke throttle grip from Radical. Completely made of aluminium with a transparent plastic cover that allows a view of the pulley. The twist grip itself is ribbed for improved grip of the rubber grip. Universal fits...
Available
€39.95
*
Motocross footpegs with widened contact area and improved grip. Made of CNC machined and anodized aluminum. The footrests are supplied together with the footrest adapters known from Radical. The rests are then bolted directly to the...
Available
€39.95
*
Herewith come new color matching brake cylinder covers for your KTM! Note No seal and no screws are supplied! The original mounting materials can still be used.
Available
€19.99
*
Herewith come new, color matching chain tensioner for your KTM! It is, from one piece CNC machined aluminum. Scope of delivery
Available
€19.99
*
Simple handlebar grip rubbers with optional red or black anodized sleeves on the front and rear part of the handle. The rubbers are medium soft and thus universally applicable. The assembly is quite Simpel. The indicated handlebar ends...
Available
€20.95
*
Matching the various other engine styling parts from Radical Racing, herewith also comes a fully enclosing rear brake cylinder guard. incl. mounting material
Available
€17.99
*
;
From €14.99
*
Aluminum fairing screws from Motoflow, in colored anodized finish. The screws are provided with wide lens head and a hexagon socket. So the fairing holds securely in place. Since it is aluminum, these screws are not suitable for high...
Available
€3.99
*
Brake & clutch lever guards are used on racing motorcycles similar to handguards on motocross bikes. However, they are intended less to protect the hands from mud and debris and more to protect the levers from a fall. That way, if the...
Available
€29.99
*
Oil filler plug for KTM models. The main purpose of the screw is to provide access to the gearbox and engine so that oil can be filled in. In this case, however, it looks visually more appealing than the simple original.
Available
€9.99
*
125 levers with ABE are the exception on the market. The often much cheaper products from Asia are of course not allowed on the vehicle. We can now offer here but in addition to these, much cheaper levers also a "V2" - premium variant,...
Available
€99.95
*
We offer a complete set consisting of adjustable brake lever and clutch lever armature. Also included is a master cylinder for hydraulic brakes. The individual parts of the set are mostly CNC milled and have an extremely attractive...
Available
€99.90
*
;
€69.90
*
Among our handlebar attachments is also a cover for the front brake cylinder. The cover consists of 2 parts, which are connected by the mounting screws. Both parts were CNC-milled and are made of aluminum. The cover is available in 3...
Available
From €19.90
*
Footrest adapter pair from Radical Racing. These adapters allow Radical footrests to be attached to the vehicle. Suitable for all KTM Duke & RC models from 2011. Scope of delivery 1 pair of footrest adapters Mounting screws Footrests are...
Available
€22.95
*
From Radical Racing we can offer different color anodized aluminum footrests. The footrests are simply exchanged against the originals. The assembly can be done within about 10 minutes and is quite simple. The footrests are delivered...
Available
€39.95
*
Spare footrest pair from Radical. Can be mounted on Radical Racing footrest adapters. Note Delivery WITHOUT footrest adapter!
Available
€22.95
*
Styling adapter plate for the vehicle stand made of CNC milled aluminium. Anodized in black and orange and therefore perfectly matched to your KTM Duke! Easy mounting and quick optical upgrading. In addition, the footprint is increased...
Available
€21.95
*
Stand mounts are used to use motorcycle paddock stands with claw mounts. The stand holders are 2-part black and orange anodized.
Available
€12.90
*
Simple CNC milled styling part for KTM Duke or RC 125, the screw is located at the top of the clutch housing. Great optical effect for a small budget!
Available
€13.99
*
CNC milled cover of the water tank incl. seal. Anodized orange. Dimensions thread: 21mm height: 16mm Outside diameter: 22mm
Available
€15.95
*
Cheap part that will attract a lot of attention. This screw cap is suitable for the rear brake fluid reservoir of the KTM Duke 125, or the front reservoir of the Aprilia RS 125 and can be fitted in less than a minute. Note: The seal of...
Available
€18.95
*
;
From €9.99
*
Here we have an oil filler plug for you, which you can easily exchange for the boring original from KTM. The assembly is of course very simple: old out, new in. You won't even need tools. The screw consists of two individual parts,...
Available
€14.99
*
;
From €10.99
*
Here we offer hand levers in a slightly shortened "Shorty" version. The levers do not affect the comfort while braking and clutch operation. Even the force to be applied during clutch operation does not have to be increased noticeably....
Available
€79.95
*
;
€59.95
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your KTM RC 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the RC 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed