1. Choose model
RC 125 (2017 bis 2020, Euro4)
RC 125 (2014 bis 2016, Euro3)
No results were found for the filter!
As a little gimmick we can offer a CNC manufactured adjusting screw for e.g. clutch cables. The adjusting screw fits on all vehicles with M8 adjusting device.
Out of Stock
€11.95
*
The most visually dangerous valve caps you can buy. The new valve caps, in the design of a hand grenade, are a real eye-catcher. Available in different colours. Scope of supply: 1 pair.
Available
€2.99
*
The footrest extension from Movetronix gives your passenger the opportunity for a more relaxed ride. The footrest extension is clamped to the footrest and therefore offers more space for the pillion rider's foot. The extension is made of...
Almost gone
€129.90
*
Mirror thread cover caps, black, for M10 thread, CNC milled
Cover for threads of the original mirrors, if you install handlebar end mirrors on your motorcycle, the existing mounts remain unused. With this aluminum cover for M10 threads, you can discreetly conceal them.
Available
€10.99
*
Hier haben wir neue Lenkerenden von Puig, den SPEED. Aus einem Aluminiumblock gefräst und in sieben verschiedenen Farben für euch zur auswahl. Das Design verbindet die Einfachheit der Linien und den Minimalismus des Renn Charakters mit...
Available
€29.95
*
Hier haben wir neue Lenkerenden von Puig, den SHORTY. Aus einem Aluminiumblock gefräst und in sieben verschiedenen Farben für euch zur auswahl. Das Design verbindet die Einfachheit der Linien und den Minimalismus des Renn Charakters....
Available
€29.95
*
This headlight bracket is an essential part for mounting the universal LED headlight from Puig. It is made of high-quality CNC-milled aluminum and is therefore very robust and durable. In black, it matches the headlight very well and...
Almost gone
€145.90
*
The lever protection set serves to protect the lever from breaking or bending when falling. The set is made of sturdy aluminum and therefore provides effective protection against falls.
Almost gone
€44.95
*
Kurzhubgasgriff, universell, Chrom
Der Universal Kurzhubgasgriff dient der Verkürzung des Gaswegs zur kompletten Gasannahme. Somit kann man mit ihm den Griff in einem anderen, angenehmeren Winkel greifen und hat trotzdem noch die volle Performance des Bikes. Mit seinen 22...
Available
€32.95
*
Handlebar riser CNC, 22mm, versch. Heights, incl. screws
Due to the slotted holes suitable for almost all mopeds and enduros! made of high quality CNC aluminum Handlebar mounts for Ø22 mm handlebars Increase the handlebar by 25/35mm
Available
€49.95
*
Locking bolt cylinder head Most Racing, M14x1,5, versch. Colors
This high quality aluminum sealing bolt with thread size M14x1.5 and matching copper sealing ring is an indispensable accessory for anyone looking for a reliable and durable sealing bolt. With its versatility, this bolt is perfect for...
Available
€17.95
*
Locking bolt cylinder head Most Racing, M12x1,5, versch. Colors
The aluminum locking bolts with thread size M12x1.5 and matching copper sealing ring are the perfect solution for closing holes, such as the temperature sensor hole on Derbi Euro4 models. Of course, the bolt is also suitable for other...
Available
€17.95
*
Brake cylinder Most, universal, 22mm, front, versch. Colors
MOST Racing hereby offers a radial CNC brake cylinder anodized in your favorite color! The assembly is very easy and fits all 22mm handlebars. Technical data: Type 3 or 4 fingers Adjustable Breakage protection Piston diameter 17.5 For...
Available
€99.95
*
This item is an original Yamaha brand. A set contains 2 valve caps for each Schrader valve. Anodized finish for durability.
Available
€7.99
*
Brake fitting/ master cylinder, universal, 22mm, versch. Colors
Technical data: Mirror mount M10 x 1.25 right-hand thread 17,5mm piston for 22mm handlebar Banjo bolt M10x1,25 for brake line external reservoir Lever travel adjustable
Available
€89.95
*
Blackway is a French brand known for its high quality styles. The Diabolos are extensions that are attached to the rear of the bike to create an optimal mount for assembly stands.
Available
€9.99
*
Renthal is one of the leading brands when it comes to quality handlebar components for enduro and supermoto bikes! We are pleased to offer you Renthal products in our store. These are CNC machined handlebar clamps with 0mm offset for...
Available
€89.90
*
Blackway is a French brand known for its high quality styles. The Diabolos are extensions that are attached to the rear of the bike to create an optimal mount for assembly stands.
Available
€9.99
*
Brake fluid reservoir, universell, rot
Herewith we offer you a cheap brake fluid reservoir with stylish red CNC parts. The lid comes directly incl. seal, clamps and hose (10cm). Lid, mounting and screw cover are anodized red. In addition, the tank has the typical level...
Out of Stock
€10.99
*
CNC handlebar brace, red, 22mm
This inexpensive and adjustable handlebar brace (225mm - 255mm) serves the stability of the handlebar and minimizes vibrations significantly. It fits Stadard handlebars with 22mm diameter and comes directly with an allen to adjust the...
Out of Stock
€19.99
*
Puigs handlebar ends combine design and utility! These lightweight and beautiful bar ends dampen vibrations very well despite their low weight. Dimensions: Length: 40mm Weight: 68g These bar ends may be mounted and legally driven without...
Almost gone
€29.95
*
;
€17.99
*
To protect against stone chips, or as a simple styling part Doppler offers here a protective cover for brake cylinders at the rear footrest. The cover is by the sleeves and long holes as far as possible universally suitable....
Available
From €19.99
*
Brake fluid reservoir, Universal, CNC milled
CNC milled brake fluid reservoir incl. handlebar mount. Available in different colours.
Almost gone
€18.90
*
The Puig lever set offered here by us consists of an adjustable brake lever, clutch lever and the corresponding adapters for mounting on the vehicle. The levers, as well as the adapters from Puig are provided with a German KBA test...
Almost gone
From €98.95
*
With CNC parts you have the opportunity to create with minimal effort an individual look to your KTM RC 125 to create. Parts like, Öleinfüllschrauben, brake cylinder cover, chain protector or even sprocket cover & motorcycle covers from CNC are mounted or replaced in a few minutes. Even more the parts, compared with a tuning exhaust system or a größeren cubic kit, significantly cheaper.
Apart from the erwähnten points CNC optics parts offer a much higher quality appearance than the Standard parts of the RC 125. We ourselves offer our own parts from Radical Racing only after strict quality control. quality control. So in addition to fit and visual impact, we also check function! For example the brake cylinder covers have a hole to prevent a vacuum in the reservoir, just like the original cover. can arise.
In addition, there are also a variety of different colors, so you also the right CNC parts matching the color of your motorcycle have.
Viewed